Liebherr L586 XPOWER Wheel Loader
Wheel Loader // Liebherr
Liebherr L586 XPOWER Bucket
| Breakout Force: | 53954.2 lbs (24,474 kg) |
| Bucket Capacity - heaped: | 7.8 cu yds (6 m) |
| Bucket Width: | 11.3 ft (3 m) |
Liebherr L586 XPOWER Dimensions
| Dump Clearance at Max Raise: | 10.8 ft (3 m) |
| Ground Clearance: | 1.2 ft (0 m) |
| Height - Top of Cab: | 12.3 ft (4 m) |
| Hinge Pin - Max Height: | 15.3 ft (5 m) |
| Length with Bucket on Ground: | 32.9 ft (10 m) |
| Reach at Max Lift and Dump: | 4.8 ft (1 m) |
| Wheelbase: | 12.1 ft (4 m) |
Liebherr L586 XPOWER Engine
| Aspiration: | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
| Displacement: | 642 cu in (0 m) |
| Engine Model: | D936 A7 |
| Gross Power: | 353 hp (263 kw) |
| Net Power: | 349 hp (260 kw) |
| Number of Cylinders: | 6.0 |
| Power Measured @: | 1800 rpm |
| Torque Measured @: | 1100 rpm |
Liebherr L586 XPOWER Hydraulic System
| Dump Time: | 3 sec |
| Lower Time: | 4 sec |
| Pump Flow Capacity: | 108 gal/min (409 l/min) |
| Pump Type: | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
| Raise Time: | 6.5 sec |
| Relief Valve Setting: | 4351.2 psi |
Liebherr L586 XPOWER Operating Specifications
| Cooling System Fluid Capacity: | 19.3 gal (73 l) |
| Engine Oil Fluid Capacity: | 10.6 gal (40 l) |
| Front Axle/Diff Fluid Capacity: | 15.9 gal (60 l) |
| Fuel Capacity: | 132 gal (500 l) |
| Hydraulic System Fluid Capacity: | 55.5 gal (210 l) |
| Operating Weight: | 71870 lbs (32,600 kg) |
| Rear Axle/Diff Fluid Capacity: | 15.9 gal (60 l) |
| Static Tipping Weight: | 47620 lbs (21,600 kg) |
| Tire Size: | 29.5R25 L3 |
| Transmission Fluid Capacity: | 27.5 ft (8 m) |
| Max Speed - Forward: | 27.5 ft (8 m) |
Liebherr L586 XPOWER Transmission
| Max Speed - Reverse: | 20.5 mph (33 kph) |
| Number of Forward Gears: | 20.5 mph (33 kph) |
