Liebherr L580 XPOWER Wheel Loader
Wheel Loader // Liebherr
Liebherr L580 XPOWER Bucket
| Breakout Force: | 50579.8 lbs (22,943 kg) |
| Bucket Capacity - heaped: | 6.8 cu yds (5 m) |
| Bucket Width: | 9.1 ft (3 m) |
Liebherr L580 XPOWER Dimensions
| Dump Clearance at Max Raise: | 10.9 ft (3 m) |
| Ground Clearance: | 1.6 ft (0 m) |
| Height - Top of Cab: | 11.9 ft (4 m) |
| Hinge Pin - Max Height: | 15 ft (5 m) |
| Length with Bucket on Ground: | 31.7 ft (10 m) |
| Reach at Max Lift and Dump: | 3.2 ft (1 m) |
| Wheelbase: | 12.2 ft (4 m) |
Liebherr L580 XPOWER Engine
| Aspiration: | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
| Displacement: | 642 cu in (0 m) |
| Engine Model: | D936 A7 |
| Gross Power: | 312 hp (233 kw) |
| Net Power: | 308 hp (230 kw) |
| Number of Cylinders: | 6.0 |
| Power Measured @: | 1800 rpm |
| Torque Measured @: | 1100 rpm |
Liebherr L580 XPOWER Hydraulic System
| Dump Time: | 2 sec |
| Lower Time: | 3.5 sec |
| Pump Flow Capacity: | 84 gal/min (318 l/min) |
| Pump Type: | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
| Raise Time: | 6.1 sec |
| Relief Valve Setting: | 4351.2 psi |
Liebherr L580 XPOWER Operating Specifications
| Cooling System Fluid Capacity: | 19.3 gal (73 l) |
| Engine Oil Fluid Capacity: | 10.6 gal (40 l) |
| Front Axle/Diff Fluid Capacity: | 15.3 gal (58 l) |
| Fuel Capacity: | 96 gal (363 l) |
| Hydraulic System Fluid Capacity: | 50.2 gal (190 l) |
| Operating Weight: | 60955 lbs (27,649 kg) |
| Rear Axle/Diff Fluid Capacity: | 15.3 gal (58 l) |
| Static Tipping Weight: | 42330 lbs (19,201 kg) |
| Tire Size: | 26.5R25 L3 |
| Transmission Fluid Capacity: | 25 ft (8 m) |
| Max Speed - Forward: | 25 ft (8 m) |
Liebherr L580 XPOWER Transmission
| Max Speed - Reverse: | 24.9 mph (40 kph) |
| Number of Forward Gears: | 24.9 mph (40 kph) |
