Liebherr L566 XPOWER Wheel Loader
Wheel Loader // Liebherr
Liebherr L566 XPOWER Bucket
| Breakout Force: | 44959.6 lbs (20,394 kg) |
| Bucket Capacity - heaped: | 5.5 cu yds (4 m) |
| Bucket Width: | 9.1 ft (3 m) |
Liebherr L566 XPOWER Dimensions
| Dump Clearance at Max Raise: | 10.6 ft (3 m) |
| Ground Clearance: | 1.9 ft (1 m) |
| Height - Top of Cab: | 11.9 ft (4 m) |
| Hinge Pin - Max Height: | 14.4 ft (4 m) |
| Length with Bucket on Ground: | 30.1 ft (9 m) |
| Reach at Max Lift and Dump: | 3.2 ft (1 m) |
| Wheelbase: | 11.8 ft (4 m) |
Liebherr L566 XPOWER Engine
| Aspiration: | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
| Displacement: | 642 cu in (0 m) |
| Engine Model: | D936 A7 |
| Gross Power: | 272 hp (203 kw) |
| Net Power: | 268 hp (200 kw) |
| Number of Cylinders: | 6.0 |
| Power Measured @: | 1800 rpm |
| Torque Measured @: | 1100 rpm |
Liebherr L566 XPOWER Hydraulic System
| Dump Time: | 2 sec |
| Lower Time: | 3.5 sec |
| Pump Flow Capacity: | 77 gal/min (291 l/min) |
| Pump Type: | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
| Raise Time: | 5.5 sec |
| Relief Valve Setting: | 4351.2 psi |
Liebherr L566 XPOWER Operating Specifications
| Cooling System Fluid Capacity: | 19.3 gal (73 l) |
| Engine Oil Fluid Capacity: | 10.6 gal (40 l) |
| Front Axle/Diff Fluid Capacity: | 11.1 gal (42 l) |
| Fuel Capacity: | 96 gal (363 l) |
| Hydraulic System Fluid Capacity: | 50.2 gal (190 l) |
| Operating Weight: | 52690 lbs (23,900 kg) |
| Rear Axle/Diff Fluid Capacity: | 11.1 gal (42 l) |
| Static Tipping Weight: | 35055 lbs (15,901 kg) |
| Tire Size: | 26.5R25 L3 |
| Transmission Fluid Capacity: | 24.1 ft (7 m) |
| Max Speed - Forward: | 24.1 ft (7 m) |
Liebherr L566 XPOWER Transmission
| Max Speed - Reverse: | 24.9 mph (40 kph) |
| Number of Forward Gears: | 24.9 mph (40 kph) |
