Liebherr L546 Wheel Loader
Wheel Loader // Liebherr
Liebherr L546 Bucket
Breakout Force: | 25180.9 lbs (11,422 kg) |
Bucket Capacity - heaped: | 3.3 cu yds (3 m) |
Bucket Width: | 8.2 ft (3 m) |
Liebherr L546 Dimensions
Dump Clearance at Max Raise: | 9 ft (3 m) |
Ground Clearance: | 1.7 ft (1 m) |
Height - Top of Cab: | 10.8 ft (3 m) |
Hinge Pin - Max Height: | 12.2 ft (4 m) |
Length with Bucket on Ground: | 25.7 ft (8 m) |
Reach at Max Lift and Dump: | 3.1 ft (1 m) |
Wheelbase: | 9.9 ft (3 m) |
Liebherr L546 Engine
Aspiration: | Water-cooled turbocharged in-line engine with� cooled exhaust gas recirculation, exhaust after-treatment with a closed diesel particle filter system and SCR technology |
Displacement: | 275 cu in (0 m) |
Engine Model: | 4045HLC09 |
Gross Power: | 165 hp (123 kw) |
Net Power: | 162 hp (121 kw) |
Number of Cylinders: | 4.0 |
Power Measured @: | 2000 rpm |
Torque Measured @: | 1500 rpm |
Liebherr L546 Hydraulic System
Dump Time: | 2.9 sec |
Lower Time: | 3.8 sec |
Pump Flow Capacity: | 45 gal/min (170 l/min) |
Pump Type: | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
Raise Time: | 5 sec |
Relief Valve Setting: | 4351.2 psi |
Liebherr L546 Operating Specifications
Cooling System Fluid Capacity: | 8.2 gal (31 l) |
Engine Oil Fluid Capacity: | 5.8 gal (22 l) |
Front Axle/Diff Fluid Capacity: | 5 gal (19 l) |
Fuel Capacity: | 54.2 gal (205 l) |
Hydraulic System Fluid Capacity: | 47.6 gal (180 l) |
Operating Weight: | 31305 lbs (14,200 kg) |
Rear Axle/Diff Fluid Capacity: | 5 gal (19 l) |
Static Tipping Weight: | 23150 lbs (10,501 kg) |
Tire Size: | 20.5R25 L3 |
Transmission Fluid Capacity: | 19.9 ft (6 m) |
Turning Radius: | 0.7 gal (3 l) |
Max Speed - Forward: | 19.9 ft (6 m) |
Liebherr L546 Transmission
Max Speed - Reverse: | 24.9 mph (40 kph) |
Number of Forward Gears: | 24.9 mph (40 kph) |
Number of Reverse Gears: | 3.0 |
Transmission Type: | 3.0 |