Liebherr L542 Wheel Loader
Wheel Loader // Liebherr
Liebherr L542 Bucket
| Breakout Force: | 24054.6 lbs (10,911 kg) |
| Bucket Capacity - heaped: | 3.7 cu yds (3 m) |
| Bucket Width: | 8.2 ft (3 m) |
Liebherr L542 Dimensions
| Dump Clearance at Max Raise: | 8.1 ft (2 m) |
| Ground Clearance: | 1.7 ft (1 m) |
| Height - Top of Cab: | 10.8 ft (3 m) |
| Hinge Pin - Max Height: | 12.9 ft (4 m) |
| Length with Bucket on Ground: | 24.1 ft (7 m) |
| Reach at Max Lift and Dump: | 3.8 ft (1 m) |
| Wheelbase: | 9.9 ft (3 m) |
Liebherr L542 Engine
| Aspiration: | Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter |
| Displacement: | 275 cu in (0 m) |
| Engine Model: | 4045HFL93 |
| Gross Power: | 161 hp (120 kw) |
| Number of Cylinders: | 4.0 |
| Power Measured @: | 2000 rpm |
| Torque Measured @: | 1600 rpm |
Liebherr L542 Hydraulic System
| Dump Time: | 1.6 sec |
| Lower Time: | 4 sec |
| Pump Flow Capacity: | 45 gal/min (170 l/min) |
| Pump Type: | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
| Raise Time: | 5.3 sec |
| Relief Valve Setting: | 4351.2 psi |
Liebherr L542 Operating Specifications
| Cooling System Fluid Capacity: | 10 gal (38 l) |
| Engine Oil Fluid Capacity: | 5.4 gal (20 l) |
| Front Axle/Diff Fluid Capacity: | 4.3 gal (16 l) |
| Fuel Capacity: | 54.2 gal (205 l) |
| Hydraulic System Fluid Capacity: | 47.6 gal (180 l) |
| Operating Weight: | 29540 lbs (13,399 kg) |
| Rear Axle/Diff Fluid Capacity: | 4 gal (15 l) |
| Static Tipping Weight: | 22485 lbs (10,199 kg) |
| Tire Size: | 20.5R25 L3 |
| Transmission Fluid Capacity: | 20.2 ft (6 m) |
| Turning Radius: | 1 gal (4 l) |
| Max Speed - Forward: | 20.2 ft (6 m) |
Liebherr L542 Transmission
| Max Speed - Reverse: | 24.9 mph (40 kph) |
| Number of Forward Gears: | 24.9 mph (40 kph) |
| Number of Reverse Gears: | 3.0 |
| Transmission Type: | 3.0 |
