Liebherr L538 2plus1 Wheel Loader
Wheel Loader // Liebherr
Liebherr L538 2plus1 Bucket
| Bucket Capacity - heaped: | 3.3 cu yds (3 m) |
| Bucket Width: | 8.3 ft (3 m) |
Liebherr L538 2plus1 Dimensions
| Dump Clearance at Max Raise: | 9.6 ft (3 m) |
| Ground Clearance: | 1.7 ft (1 m) |
| Height - Top of Cab: | 10.7 ft (3 m) |
| Hinge Pin - Max Height: | 12.9 ft (4 m) |
| Length with Bucket on Ground: | 23.5 ft (7 m) |
| Wheelbase: | 9.8 ft (3 m) |
Liebherr L538 2plus1 Engine
| Aspiration: | turbo-charged |
| Displacement: | 388.2 cu in (0 m) |
| Engine Model: | D 934 S AG |
| Gross Power: | 140.9 hp (105 kw) |
| Number of Cylinders: | 4.0 |
| Power Measured @: | 2000 rpm |
| Torque Measured @: | 1300 rpm |
Liebherr L538 2plus1 Hydraulic System
| Dump Time: | 1.6 sec |
| Lower Time: | 4 sec |
| Pump Flow Capacity: | 37 gal/min (140 l/min) |
| Pump Type: | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
| Raise Time: | 5.9 sec |
| Relief Valve Setting: | 4786.3 psi |
Liebherr L538 2plus1 Operating Specifications
| Alternator Supplied Amperage: | 80 A |
| Engine Oil Fluid Capacity: | 7.7 gal (29 l) |
| Front Axle/Diff Fluid Capacity: | 4.4 gal (17 l) |
| Fuel Capacity: | 45 gal (170 l) |
| Hydraulic System Fluid Capacity: | 47.6 gal (180 l) |
| Operating Voltage: | 24 V V |
| Rear Axle Oscillation: | 12 ° |
| Rear Axle/Diff Fluid Capacity: | 4 gal (15 l) |
| Tire Size: | 20.5R25 |
Liebherr L538 2plus1 Transmission
| Max Speed - Reverse: | 24.9 mph (40 kph) |
| Number of Forward Gears: | 24.9 mph (40 kph) |
| Number of Reverse Gears: | 3.0 |
| Transmission Type: | 3.0 |
