JCB 435S HL Wheel Loader
Wheel Loader // JCB
JCB 435S HL Bucket
| Breakout Force: | 31023.7 lbs (14,072 kg) |
| Bucket Capacity - heaped: | 2.5 cu yds (2 m) |
| Bucket Capacity - struck: | 2.2 cu yds (2 m) |
| Bucket Width: | 8.4 ft (3 m) |
JCB 435S HL Dimensions
| Dump Clearance at Max Raise: | 11.2 ft (3 m) |
| Ground Clearance: | 1.7 ft (1 m) |
| Height - Top of Cab: | 12.3 ft (4 m) |
| Hinge Pin - Max Height: | 14.3 ft (4 m) |
| Length with Bucket on Ground: | 24.7 ft (8 m) |
| Reach at Max Lift and Dump: | 3.2 ft (1 m) |
| Wheelbase: | 10.1 ft (3 m) |
| Width Over Tires: | 9.8 ft (3 m) |
JCB 435S HL Engine
| Aspiration: | Turbo Charged |
| Displacement: | 408.9 cu in (0 m) |
| Engine Model: | QSB |
| Gross Power: | 230 hp (172 kw) |
| Net Power: | 206 hp (154 kw) |
| Number of Cylinders: | 6.0 |
| Power Measured @: | 2100 rpm |
| Torque Measured @: | 1500 rpm |
JCB 435S HL Hydraulic System
| Dump Time: | 1.8 sec |
| Lower Time: | 2.8 sec |
| Pump Flow Capacity: | 34.9 gal/min (132 l/min) |
| Pump Type: | Twin variable displacement piston pumps |
| Raise Time: | 4.7 sec |
| Relief Valve Setting: | 3190 psi |
JCB 435S HL Operating Specifications
| Alternator Supplied Amperage: | 120 A |
| Fuel Capacity: | 105.7 gal (400 l) |
| Hydraulic System Fluid Capacity: | 55.5 gal (210 l) |
| Operating Voltage: | 24 V V |
| Operating Weight: | 31449 lbs (14,265 kg) |
| Rear Axle Oscillation: | 10.5 ° |
| Transmission Fluid Capacity: | 19.8 ft (6 m) |
| Max Speed - Forward: | 19.8 ft (6 m) |
JCB 435S HL Transmission
| Max Speed - Reverse: | 32.5 mph (52 kph) |
| Number of Forward Gears: | 22.5 mph (36 kph) |
| Number of Reverse Gears: | 6.0 |
| Transmission Type: | 3.0 |
