Caterpillar IT28G Wheel Loader
Wheel Loader // Caterpillar
Caterpillar IT28G Bucket
| Breakout Force: | 23440 lbs (10,632 kg) |
| Bucket Capacity - heaped: | 2.7 cu yds (2 m) |
| Bucket Capacity - struck: | 2.3 cu yds (2 m) |
| Bucket Width: | 8.4 ft (3 m) |
Caterpillar IT28G Dimensions
| Dump Clearance at Max Raise: | 9.8 ft (3 m) |
| Fork Tine Length: | 4 ft (1 m) |
| Ground Clearance: | 1.4 ft (0 m) |
| Height - Top of Cab: | 10.8 ft (3 m) |
| Hinge Pin - Max Height: | 13.1 ft (4 m) |
| Length with Bucket on Ground: | 23.9 ft (7 m) |
| Max Lift Height: | 12.7 ft (4 m) |
| Reach at Max Height and Dump: | 3.4 ft (1 m) |
| Reach at Max Lift and Dump: | 3.2 ft (1 m) |
| Wheelbase: | 9.6 ft (3 m) |
| Width Over Tires: | 8.4 ft (3 m) |
Caterpillar IT28G Engine
| Displacement: | 366.2 cu in (0 m) |
| Engine Model: | 3116T |
| Gross Power: | 156 hp (116 kw) |
| Net Power: | 145 hp (108 kw) |
| Power Measured @: | 2300 rpm |
Caterpillar IT28G Hydraulic System
| Dump Time: | 1.4 sec |
| Lower Time: | 2.8 sec |
| Pump Flow Capacity: | 27.5 gal/min (104 l/min) |
| Raise Time: | 6.1 sec |
| Relief Valve Setting: | 3002.3 psi |
Caterpillar IT28G Operating Specifications
| Alternator Supplied Amperage: | 80 A |
| Cooling System Fluid Capacity: | 11.1 gal (42 l) |
| Front Axle/Diff Fluid Capacity: | 6.9 gal (26 l) |
| Fuel Capacity: | 59.5 gal (225 l) |
| Hydraulic System Fluid Capacity: | 33.1 gal (125 l) |
| Operating Voltage: | 24 V V |
| Operating Weight: | 26750.9 lbs (12,134 kg) |
| Rear Axle Oscillation: | 11 ° |
| Rear Axle/Diff Fluid Capacity: | 6.7 gal (25 l) |
| Rear Diff Fluid Capacity: | 6.7 gal (25 l) |
| Static Tipping Load - Bucket: | 19916.6 lbs (9,034 kg) |
| Tire Size: | 20.5R25 L3 XHA |
| Transmission Fluid Capacity: | 16.7 ft (5 m) |
| Turning Radius: | 9.2 gal (35 l) |
| Max Speed - Forward: | 16.7 ft (5 m) |
Caterpillar IT28G Transmission
| Max Speed - Reverse: | 37.7 mph (61 kph) |
| Number of Forward Gears: | 25.8 mph (42 kph) |
| Number of Reverse Gears: | 4.0 |
| Transmission Type: | 3.0 |
