Caterpillar 272C Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 272C Specifications
Caterpillar 272C Skid Steer Loader is equipped with Cat C3.4 DIT 94hp (gross power) engine. Combine value of all its cylinders is 201cu in (displacement).
Caterpillar 272C's fuel capacity is 26gal. It comes with 3.7gal and 15gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 272C loader has 7315lb breakout force and 6500degrees tipping angle.
Its length with bucket is 12.5ft in and length without bucket is 10.71ft in. Caterpillar 272C's height to top of cab is 6.83ft in. And its wheelbase is 4.5ft in.
Caterpillar 272C Dimentions
| Length With Bucket: | 12.5ft in |
| Width Over Tires: | 5.5ft in |
| Ground Clearance: | 8.81in |
| Height to Top of Cab: | 6.83ft in |
| Wheelbase: | 4.5ft in |
| Length W/O Bucket: | 10.71ft in |
| Clearance at Max Lift and Dump: | 8.16ft in |
| Reach at Max Lift and Dump: | 30in |
| Length With Bucket on Ground: | 150.9in |
| Length Without Bucket: | 122.8in |
| Maximum Overall Height: | 162in |
| Rack back Angle Maxium Height: | 83 degrees |
| Maximum Dump Angle: | 51 degrees |
| Bucket Pin Height Carry Position: | 7.8in |
| Bucket Pin Height Maximum Lift: | 10.76ft in |
| Clearance at Maximum Lift and Dump: | 97.9in |
| Departure Angle: | 26 degrees |
| Height Top of Cab: | 6.9ft in |
| Turn Radius from Center Coupler: | 57.1in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 4.54ft in |
| Reach Maximum Life Dump: | 30.1in |
| Turn Radius from Center Bucket: | 89.1in |
Caterpillar 272C Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 3480lb |
| Breakout Force Tilt Cylinder: | 7315lb |
| Rated Operating Capacity: | 3250lb |
| Tipping Load: | 6500lb |
Caterpillar 272C Engine
| Engine Make: | 2236 |
| Engine Model: | Cat C3.4 DIT |
| Gross Power: | 94hp |
| Displacement: | 201cu in |
| Bore: | 3.7in |
| Stroke: | 4.7in |
| Net Power: | 90hp |
| Net Flywheel Power: | 90hp |
Caterpillar 272C Operational
| Fuel Capacity: | 26gal |
| Cooling System Fluid Capacity: | 3.7gal |
| Hydraulic System Fluid Capacity: | 15gal |
| Max Speed: | 7.2mph |
| Chain Box Fluid Capacity Each Side: | 2.9gal |
Caterpillar 272C Power Train
| Travel Speed Forward: | 7.2mph |
| Travel Speed Reverse: | 7.2mph |
Caterpillar 272C Loader
| Breakout Force: | 7315lb |
| Operating Load Rating: | 3250lb |
| Tipping Angle: | 6500degrees |
Caterpillar 272C Weights
| Operating Weight: | 8362lb |
Caterpillar 272C Hydraulic
| Pump Flow Capacity: | 22gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 272C Hydraulic System
| Loader Hydraulic Pressure: | 3335 psi |
| Loader Hydraulic Flow: | 22 gal/min |
| Maximum Loader Hydraulic Pressure: | 4061 psi |
| Maximum Loader Hydraulic Flow: | 33 gal/min |
| Hydraulic Power: | 42.8hp |
Caterpillar 272C Service Refill Capacities
| Cooling System: | 3.7gal |
| Fuel Tank: | 26gal |
| Hydraulic Tank: | 11gal |
| Engine Crankcase: | 2.6gal |
| Hydraulic System: | 15gal |
| Chain Box Each Side: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 272C Cab
| Cab Rops: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Cab Fops: | SAE J231 JAN81, ISO 3449:1992 Level II |
