Caterpillar 268B Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 268B Specifications
Caterpillar 268B Skid Steer Loader is equipped with Cat 3044C DIT 82hp (gross power) engine.
Caterpillar 268B's fuel capacity is 23.8gal. It comes with 2.7gal and 14.1gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 268B loader has 5507.2lb breakout force and 5399.2degrees tipping angle.
Its length with bucket is 11.87ft in and length without bucket is 9.53ft in. Caterpillar 268B's height to top of cab is 6.77ft in. And its wheelbase is 4.03ft in.
Caterpillar 268B Dimentions
| Length With Bucket: | 11.87ft in |
| Width Over Tires: | 6.01ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.77ft in |
| Wheelbase: | 4.03ft in |
| Length W/O Bucket: | 9.53ft in |
| Clearance at Max Lift and Dump: | 7.95ft in |
| Reach at Max Lift and Dump: | 32.64in |
| Length With Bucket on Ground: | 142in |
| Length Without Bucket: | 114in |
| Maximum Overall Height: | 160in |
| Bucket Pin Height Carry Position: | 8.4in |
| Bucket Pin Height Maximum Lift: | 10.59ft in |
| Clearance at Maximum Lift and Dump: | 95in |
| Height Top of Cab: | 6.92ft in |
| Turn Radius from Center Coupler: | 52in |
| Vehicle Width Over Height: | 72in |
| Wheel Base: | 4ft in |
| Reach Maximum Life Dump: | 33in |
| Turn Radius from Center Bucket: | 86in |
Caterpillar 268B Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2750lb |
| Breakout Force Tilt Cylinder: | 5508lb |
| Rated Operating Capacity: | 2700lb |
| Tipping Load: | 5612.96lb |
Caterpillar 268B Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3044C DIT |
| Gross Power: | 82hp |
| Bore: | 3.7in |
| Stroke: | 4.7in |
| Net Power: | 76.5hp |
| Net Flywheel Power: | 76hp |
Caterpillar 268B Operational
| Fuel Capacity: | 23.8gal |
| Cooling System Fluid Capacity: | 2.7gal |
| Hydraulic System Fluid Capacity: | 14.1gal |
| Max Speed: | 7.3mph |
| Chain Box Fluid Capacity Each Side: | 2.2gal |
| Tire Size: | 12x16.5 10PR |
Caterpillar 268B Power Train
| Travel Speed Forward: | 7.2mph |
| Travel Speed Reverse: | 7.2mph |
Caterpillar 268B Loader
| Breakout Force: | 5507.2lb |
| Operating Load Rating: | 2698.5lb |
| Tipping Angle: | 5399.2degrees |
Caterpillar 268B Weights
| Operating Weight: | 7995lb |
Caterpillar 268B Hydraulic
| Pump Flow Capacity: | 33.1gal/min |
| Relief Valve Pressure: | 4061.1psi |
Caterpillar 268B Hydraulic System
| Loader Hydraulic Pressure: | 4061.06 psi |
| Loader Hydraulic Flow: | 33.02 gal/min |
| Maximum Loader Hydraulic Pressure: | 4060 psi |
| Maximum Loader Hydraulic Flow: | 33 gal/min |
| Hydraulic Power: | 78.2hp |
| Hydraulic Flow: | High Flow XPS |
Caterpillar 268B Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 23.8gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.6gal |
| Hydraulic System: | 14gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 268B Cab
| Cab Rops: | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
