Caterpillar 262 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 262 Specifications
Caterpillar 262 Skid Steer Loader is equipped with Cat 3034C 80hp (gross power) engine. Combine value of all its cylinders is 183cu in (displacement).
Caterpillar 262's fuel capacity is 23.8gal. It comes with 14.1gal hydraulic system fluid capacity respectively.
Caterpillar 262 loader has 4779.6degrees tipping angle.
Its length with bucket is 11.87ft in and length without bucket is 9.55ft in. Caterpillar 262's height to top of cab is 6.83ft in. And its wheelbase is 4.03ft in.
Caterpillar 262 Dimentions
| Length With Bucket: | 11.87ft in |
| Width Over Tires: | 6.01ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.83ft in |
| Wheelbase: | 4.03ft in |
| Length W/O Bucket: | 9.55ft in |
| Clearance at Max Lift and Dump: | 7.99ft in |
| Reach at Max Lift and Dump: | 30.71in |
| Length With Bucket on Ground: | 142.4in |
| Length Without Bucket: | 114.3in |
| Maximum Overall Height: | 161in |
| Bucket Pin Height Carry Position: | 9.6in |
| Bucket Pin Height Maximum Lift: | 10.65ft in |
| Clearance at Maximum Lift and Dump: | 98.2in |
| Height Top of Cab: | 6.89ft in |
| Vehicle Width Over Height: | 72in |
| Wheel Base: | 4.03ft in |
| Reach Maximum Life Dump: | 32.5in |
Caterpillar 262 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2550lb |
| Breakout Force Tilt Cylinder: | 5212lb |
| Rated Operating Capacity: | 2500lb |
| Tipping Load: | 5000lb |
Caterpillar 262 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3034C |
| Gross Power: | 80hp |
| Displacement: | 183cu in |
| Bore: | 3.9in |
| Stroke: | 4in |
| Net Power: | 74hp |
| Net Flywheel Power: | 74hp |
Caterpillar 262 Operational
| Fuel Capacity: | 23.8gal |
| Hydraulic System Fluid Capacity: | 14.1gal |
| Max Speed: | 7.6mph |
| Operating Speed: | 7.6mph |
Caterpillar 262 Loader
| Operating Load Rating: | 2500lb |
| Tipping Angle: | 4779.6degrees |
Caterpillar 262 Weights
| Operating Weight: | 7655lb |
Caterpillar 262 Hydraulic
| Pump Flow Capacity: | 22gal/min |
Caterpillar 262 Hydraulic System
| Loader Hydraulic Pressure: | 3300 psi |
| Loader Hydraulic Flow: | 22 gal/min |
| Hydraulic Flow: | Standard flow |
Caterpillar 262 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 23.8gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 1.8gal |
| Hydraulic System: | 14gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 262 Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
