Caterpillar 252B SERIES 3 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 252B SERIES 3 Specifications
Caterpillar 252B SERIES 3 Skid Steer Loader is equipped with Cat C3.4 DIT 74hp (gross power) engine. Combine value of all its cylinders is 201cu in (displacement).
Caterpillar 252B SERIES 3's fuel capacity is 23.8gal. It comes with 2.7gal and 14.1gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 252B SERIES 3 loader has 5508lb breakout force and 5300degrees tipping angle.
Its length with bucket is 11.87ft in and length without bucket is 9.52ft in. Caterpillar 252B SERIES 3's height to top of cab is 6.77ft in. And its wheelbase is 4.03ft in.
Caterpillar 252B SERIES 3 Dimentions
| Length With Bucket: | 11.87ft in |
| Width Over Tires: | 6.01ft in |
| Ground Clearance: | 7.7in |
| Height to Top of Cab: | 6.77ft in |
| Wheelbase: | 4.03ft in |
| Length W/O Bucket: | 9.52ft in |
| Clearance at Max Lift and Dump: | 7.95ft in |
| Reach at Max Lift and Dump: | 32.64in |
| Length With Bucket on Ground: | 142in |
| Length Without Bucket: | 114in |
| Maximum Overall Height: | 160in |
| Rack back Angle Maxium Height: | 88 degrees |
| Maximum Dump Angle: | 51 degrees |
| Bucket Pin Height Carry Position: | 8.4in |
| Bucket Pin Height Maximum Lift: | 10.5ft in |
| Clearance at Maximum Lift and Dump: | 95in |
| Departure Angle: | 26.4 degrees |
| Height Top of Cab: | 6.89ft in |
| Turn Radius from Center Coupler: | 54in |
| Vehicle Width Over Height: | 72in |
| Wheel Base: | 4ft in |
| Reach Maximum Life Dump: | 33in |
| Turn Radius from Center Bucket: | 85in |
Caterpillar 252B SERIES 3 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2700lb |
| Breakout Force Tilt Cylinder: | 5508lb |
| Rated Operating Capacity: | 2650lb |
| Tipping Load: | 5300lb |
Caterpillar 252B SERIES 3 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat C3.4 DIT |
| Gross Power: | 74hp |
| Displacement: | 201cu in |
| Bore: | 3.7in |
| Stroke: | 4.7in |
| Net Power: | 71hp |
| Net Flywheel Power: | 71hp |
Caterpillar 252B SERIES 3 Operational
| Fuel Capacity: | 23.8gal |
| Cooling System Fluid Capacity: | 2.7gal |
| Hydraulic System Fluid Capacity: | 14.1gal |
| Max Speed: | 11.1mph |
| Chain Box Fluid Capacity Each Side: | 2.2gal |
| Operating Speed: | 7.4mph |
Caterpillar 252B SERIES 3 Power Train
| Travel Speed Forward: | 7.4mph |
| Travel Speed Reverse: | 7.4mph |
Caterpillar 252B SERIES 3 Loader
| Breakout Force: | 5508lb |
| Operating Load Rating: | 2650lb |
| Tipping Angle: | 5300degrees |
Caterpillar 252B SERIES 3 Weights
| Operating Weight: | 7861lb |
Caterpillar 252B SERIES 3 Hydraulic
| Pump Flow Capacity: | 22gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 252B SERIES 3 Hydraulic System
| Loader Hydraulic Pressure: | 3335 psi |
| Loader Hydraulic Flow: | 22 gal/min |
| Hydraulic Power: | 42.8hp |
| Hydraulic Flow: | Standard |
Caterpillar 252B SERIES 3 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 23.8gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.4gal |
| Hydraulic System: | 14gal |
| Chain Box Each Side: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 252B SERIES 3 Cab
| Cab Rops: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Cab Fops: | SAE J231 JAN81, ISO 3449:1992 Level II |
