Caterpillar 252 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 252 Specifications
Caterpillar 252 Skid Steer Loader is equipped with Cat 3034C 63hp (gross power) engine. Combine value of all its cylinders is 183cu in (displacement).
Caterpillar 252's fuel capacity is 23.8gal. It comes with 14.1gal hydraulic system fluid capacity respectively.
Caterpillar 252 loader has 4733.3degrees tipping angle.
Its length with bucket is 11.87ft in and length without bucket is 9.55ft in. Caterpillar 252's height to top of cab is 6.83ft in. And its wheelbase is 4.03ft in.
Caterpillar 252 Dimentions
| Length With Bucket: | 11.87ft in |
| Width Over Tires: | 6.01ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.83ft in |
| Wheelbase: | 4.03ft in |
| Length W/O Bucket: | 9.55ft in |
| Clearance at Max Lift and Dump: | 7.99ft in |
| Reach at Max Lift and Dump: | 30.71in |
| Length With Bucket on Ground: | 142.4in |
| Length Without Bucket: | 114.3in |
| Maximum Overall Height: | 161in |
| Bucket Pin Height Carry Position: | 9.6in |
| Bucket Pin Height Maximum Lift: | 10.65ft in |
| Clearance at Maximum Lift and Dump: | 98.2in |
| Height Top of Cab: | 6.89ft in |
| Vehicle Width Over Height: | 72in |
| Wheel Base: | 4.03ft in |
| Reach Maximum Life Dump: | 32.5in |
Caterpillar 252 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2300lb |
| Breakout Force Tilt Cylinder: | 5212lb |
| Rated Operating Capacity: | 2250lb |
| Tipping Load: | 4500lb |
Caterpillar 252 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3034C |
| Gross Power: | 63hp |
| Displacement: | 183cu in |
| Bore: | 3.9in |
| Stroke: | 4in |
| Net Power: | 59hp |
| Net Flywheel Power: | 59hp |
Caterpillar 252 Operational
| Fuel Capacity: | 23.8gal |
| Hydraulic System Fluid Capacity: | 14.1gal |
| Max Speed: | 7.6mph |
| Operating Speed: | 7.6mph |
Caterpillar 252 Loader
| Operating Load Rating: | 2250lb |
| Tipping Angle: | 4733.3degrees |
Caterpillar 252 Weights
| Operating Weight: | 7615lb |
Caterpillar 252 Hydraulic
| Pump Flow Capacity: | 22gal/min |
Caterpillar 252 Hydraulic System
| Loader Hydraulic Pressure: | 3300 psi |
| Loader Hydraulic Flow: | 22 gal/min |
| Hydraulic Flow: | Standard flow |
Caterpillar 252 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 23.8gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 1.8gal |
| Hydraulic System: | 14gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 252 Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
