Caterpillar 248B Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 248B Specifications
Caterpillar 248B Skid Steer Loader is equipped with Cat 3044C DIT 82hp (gross power) engine.
Caterpillar 248B's fuel capacity is 23.8gal. It comes with 2.7gal and 13.8gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 248B loader has 5482.9lb breakout force and 3999.2degrees tipping angle.
Its length with bucket is 11.54ft in and length without bucket is 9.19ft in. Caterpillar 248B's height to top of cab is 6.87ft in. And its wheelbase is 3.73ft in.
Caterpillar 248B Dimentions
| Length With Bucket: | 11.54ft in |
| Width Over Tires: | 5.5ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.87ft in |
| Wheelbase: | 3.73ft in |
| Length W/O Bucket: | 9.19ft in |
| Clearance at Max Lift and Dump: | 7.87ft in |
| Reach at Max Lift and Dump: | 21.3in |
| Length With Bucket on Ground: | 138in |
| Length Without Bucket: | 110in |
| Maximum Overall Height: | 156in |
| Bucket Pin Height Carry Position: | 10in |
| Bucket Pin Height Maximum Lift: | 10.17ft in |
| Clearance at Maximum Lift and Dump: | 94in |
| Height Top of Cab: | 6.84ft in |
| Turn Radius from Center Coupler: | 52in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 3.75ft in |
| Reach Maximum Life Dump: | 21in |
| Turn Radius from Center Bucket: | 83in |
Caterpillar 248B Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2100lb |
| Breakout Force Tilt Cylinder: | 5484lb |
| Rated Operating Capacity: | 2000lb |
| Tipping Load: | 4188lb |
Caterpillar 248B Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3044C DIT |
| Gross Power: | 82hp |
| Bore: | 3.7in |
| Stroke: | 4.7in |
| Net Power: | 76.5hp |
| Net Flywheel Power: | 76hp |
Caterpillar 248B Operational
| Fuel Capacity: | 23.8gal |
| Cooling System Fluid Capacity: | 2.7gal |
| Hydraulic System Fluid Capacity: | 13.8gal |
| Max Speed: | 7.8mph |
| Chain Box Fluid Capacity Each Side: | 1.9gal |
| Tire Size: | 12x16.5 10PR |
Caterpillar 248B Power Train
| Travel Speed Forward: | 7.7mph |
| Travel Speed Reverse: | 7.7mph |
Caterpillar 248B Loader
| Breakout Force: | 5482.9lb |
| Operating Load Rating: | 1999.6lb |
| Tipping Angle: | 3999.2degrees |
Caterpillar 248B Weights
| Operating Weight: | 7321lb |
Caterpillar 248B Hydraulic
| Pump Flow Capacity: | 33.1gal/min |
| Relief Valve Pressure: | 4061.1psi |
Caterpillar 248B Hydraulic System
| Loader Hydraulic Pressure: | 4061.06 psi |
| Loader Hydraulic Flow: | 33.02 gal/min |
| Maximum Loader Hydraulic Pressure: | 4060 psi |
| Maximum Loader Hydraulic Flow: | 33 gal/min |
| Hydraulic Power: | 78.2hp |
| Hydraulic Flow: | High Flow XPS |
Caterpillar 248B Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 23.8gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.6gal |
| Hydraulic System: | 13.7gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 248B Cab
| Cab Rops: | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
