Caterpillar 248 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 248 Specifications
Caterpillar 248 Skid Steer Loader is equipped with Cat 3034C 80hp (gross power) engine. Combine value of all its cylinders is 183cu in (displacement).
Caterpillar 248's fuel capacity is 23.8gal. It comes with 14.1gal hydraulic system fluid capacity respectively.
Caterpillar 248 loader has 3810degrees tipping angle.
Its length with bucket is 11.54ft in and length without bucket is 9.19ft in. Caterpillar 248's height to top of cab is 6.87ft in. And its wheelbase is 3.73ft in.
Caterpillar 248 Dimentions
| Length With Bucket: | 11.54ft in |
| Width Over Tires: | 6.01ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.87ft in |
| Wheelbase: | 3.73ft in |
| Length W/O Bucket: | 9.19ft in |
| Clearance at Max Lift and Dump: | 7.87ft in |
| Reach at Max Lift and Dump: | 23.39in |
| Length With Bucket on Ground: | 138in |
| Length Without Bucket: | 110in |
| Maximum Overall Height: | 156in |
| Bucket Pin Height Carry Position: | 120in |
| Bucket Pin Height Maximum Lift: | 10.17ft in |
| Clearance at Maximum Lift and Dump: | 94in |
| Height Top of Cab: | 6.75ft in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 3.73ft in |
| Reach Maximum Life Dump: | 21.3in |
Caterpillar 248 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2100lb |
| Breakout Force Tilt Cylinder: | 5261lb |
| Rated Operating Capacity: | 2000lb |
| Tipping Load: | 4000lb |
Caterpillar 248 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3034C |
| Gross Power: | 80hp |
| Displacement: | 183cu in |
| Bore: | 3.9in |
| Stroke: | 4in |
| Net Power: | 74hp |
| Net Flywheel Power: | 55hp |
Caterpillar 248 Operational
| Fuel Capacity: | 23.8gal |
| Hydraulic System Fluid Capacity: | 14.1gal |
| Max Speed: | 7.6mph |
| Operating Speed: | 7.6mph |
Caterpillar 248 Loader
| Operating Load Rating: | 2000lb |
| Tipping Angle: | 3810degrees |
Caterpillar 248 Weights
| Operating Weight: | 7338lb |
Caterpillar 248 Hydraulic
| Pump Flow Capacity: | 33.1gal/min |
Caterpillar 248 Hydraulic System
| Loader Hydraulic Pressure: | 4200 psi |
| Loader Hydraulic Flow: | 33 gal/min |
| Hydraulic Flow: | Standard flow |
Caterpillar 248 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 23.8gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 1.8gal |
| Hydraulic System: | 13.7gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 248 Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
