Caterpillar 246C Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 246C Specifications
Caterpillar 246C Skid Steer Loader is equipped with Cat C3.4 DIT 74hp (gross power) engine. Combine value of all its cylinders is 201cu in (displacement).
Caterpillar 246C's fuel capacity is 26gal. It comes with 3.7gal and 15gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 246C loader has 7328lb breakout force and 4300degrees tipping angle.
Its length with bucket is 12.11ft in and length without bucket is 10.25ft in. Caterpillar 246C's height to top of cab is 6.83ft in. And its wheelbase is 4.07ft in.
Caterpillar 246C Dimentions
| Length With Bucket: | 12.11ft in |
| Width Over Tires: | 5.5ft in |
| Ground Clearance: | 8.81in |
| Height to Top of Cab: | 6.83ft in |
| Wheelbase: | 4.07ft in |
| Length W/O Bucket: | 10.25ft in |
| Clearance at Max Lift and Dump: | 7.95ft in |
| Reach at Max Lift and Dump: | 23.6in |
| Length With Bucket on Ground: | 145.31in |
| Length Without Bucket: | 117.2in |
| Maximum Overall Height: | 157.4in |
| Rack back Angle Maxium Height: | 85 degrees |
| Maximum Dump Angle: | 40 degrees |
| Bucket Pin Height Carry Position: | 7.8in |
| Bucket Pin Height Maximum Lift: | 10.25ft in |
| Clearance at Maximum Lift and Dump: | 95.4in |
| Departure Angle: | 26 degrees |
| Height Top of Cab: | 6.9ft in |
| Turn Radius from Center Coupler: | 54.6in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 4.07ft in |
| Reach Maximum Life Dump: | 23.6in |
| Turn Radius from Center Bucket: | 85.3in |
Caterpillar 246C Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2350lb |
| Breakout Force Tilt Cylinder: | 7328lb |
| Rated Operating Capacity: | 2150lb |
| Tipping Load: | 4300lb |
Caterpillar 246C Engine
| Engine Make: | 2236 |
| Engine Model: | Cat C3.4 DIT |
| Gross Power: | 74hp |
| Displacement: | 201cu in |
| Bore: | 3.7in |
| Stroke: | 4.7in |
| Net Power: | 73hp |
| Net Flywheel Power: | 73hp |
Caterpillar 246C Operational
| Fuel Capacity: | 26gal |
| Cooling System Fluid Capacity: | 3.7gal |
| Hydraulic System Fluid Capacity: | 15gal |
| Max Speed: | 7.7mph |
| Chain Box Fluid Capacity Each Side: | 2.6gal |
Caterpillar 246C Power Train
| Travel Speed Forward: | 7.7mph |
| Travel Speed Reverse: | 7.7mph |
Caterpillar 246C Loader
| Breakout Force: | 7328lb |
| Operating Load Rating: | 2150lb |
| Tipping Angle: | 4300degrees |
Caterpillar 246C Weights
| Operating Weight: | 7480lb |
Caterpillar 246C Hydraulic
| Pump Flow Capacity: | 22gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 246C Hydraulic System
| Loader Hydraulic Pressure: | 3335 psi |
| Loader Hydraulic Flow: | 22 gal/min |
| Maximum Loader Hydraulic Pressure: | 4061 psi |
| Maximum Loader Hydraulic Flow: | 33 gal/min |
| Hydraulic Power: | 42.8hp |
Caterpillar 246C Service Refill Capacities
| Cooling System: | 3.7gal |
| Fuel Tank: | 26gal |
| Hydraulic Tank: | 11gal |
| Engine Crankcase: | 2.6gal |
| Hydraulic System: | 15gal |
| Chain Box Each Side: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 246C Cab
| Cab Rops: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Cab Fops: | SAE J231 JAN81, ISO 3449:1992 Level II |
