Caterpillar 242B Skid Steer Loader

Caterpillar 242B Skid Steer Loader

Skid Steer Loader // Caterpillar

Caterpillar 242B Specifications

Caterpillar 242B Skid Steer Loader is equipped with Cat 3024C T 62hp (gross power) engine.

Caterpillar 242B's fuel capacity is 17.2gal. It comes with 2.7gal and 14.6gal cooling system fluid capacity and hydraulic system fluid capacity respectively.

Caterpillar 242B loader has 4058.8lb breakout force and 3999.2degrees tipping angle.

Its length with bucket is 11.28ft in and length without bucket is 9.06ft in. Caterpillar 242B's height to top of cab is 6.52ft in. And its wheelbase is 3.59ft in.

Caterpillar 242B Dimentions

Length With Bucket: 11.28ft in
Width Over Tires: 5.5ft in
Ground Clearance: 7in
Height to Top of Cab: 6.52ft in
Wheelbase: 3.59ft in
Length W/O Bucket: 9.06ft in
Clearance at Max Lift and Dump: 7.45ft in
Reach at Max Lift and Dump: 30.16in
Length With Bucket on Ground: 135in
Length Without Bucket: 109in
Maximum Overall Height: 155in
Bucket Pin Height Carry Position: 12in
Bucket Pin Height Maximum Lift: 10ft in
Clearance at Maximum Lift and Dump: 88in
Height Top of Cab: 6.5ft in
Turn Radius from Center Coupler: 56.5in
Vehicle Width Over Height: 66in
Wheel Base: 3.59ft in
Reach Maximum Life Dump: 30in
Turn Radius from Center Bucket: 87.4in

Caterpillar 242B Operating Specifications

Rated Operating Capacity with Optionak Counterweight: 2047lb
Breakout Force Tilt Cylinder: 4059lb
Rated Operating Capacity: 2000lb
Tipping Load: 4000lb

Caterpillar 242B Engine

Engine Make: 2236
Engine Model: Cat 3024C T
Gross Power: 62hp
Bore: 3.3in
Stroke: 3.9in
Net Power: 57.7hp
Net Flywheel Power: 57hp

Caterpillar 242B Operational

Fuel Capacity: 17.2gal
Cooling System Fluid Capacity: 2.7gal
Hydraulic System Fluid Capacity: 14.6gal
Max Speed: 7.5mph
Chain Box Fluid Capacity Each Side: 1.6gal
Tire Size: 12x16.5 10PR

Caterpillar 242B Power Train

Travel Speed Forward: 7.4mph
Travel Speed Reverse: 7.4mph

Caterpillar 242B Loader

Breakout Force: 4058.8lb
Operating Load Rating: 1999.6lb
Tipping Angle: 3999.2degrees

Caterpillar 242B Weights

Operating Weight: 6802lb

Caterpillar 242B Hydraulic

Pump Flow Capacity: 15.9gal/min
Relief Valve Pressure: 3335.9psi

Caterpillar 242B Hydraulic System

Loader Hydraulic Pressure: 3335 psi
Loader Hydraulic Flow: 15.6 gal/min
Maximum Loader Hydraulic Flow: 26 gal/min

Caterpillar 242B Service Refill Capacities

Cooling System: 2.6gal
Fuel Tank: 17gal
Hydraulic Tank: 9.2gal
Engine Crankcase: 2.1gal
Hydraulic System: 14.5gal
Chain Box Each Side: SAE J1040 MAY94 and ISO3471:1994

Caterpillar 242B Cab

Cab Rops: SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Cab Fops: SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
We Help Industry To Utilize The
Heavy Equipment Work Better