Caterpillar 242B SERIES 3 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 242B SERIES 3 Specifications
Caterpillar 242B SERIES 3 Skid Steer Loader is equipped with Cat 3.4 DIT 74hp (gross power) engine. Combine value of all its cylinders is 201cu in (displacement).
Caterpillar 242B SERIES 3's fuel capacity is 15.4gal. It comes with 2.7gal and 14.6gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 242B SERIES 3 loader has 4507lb breakout force and 4300degrees tipping angle.
Its length with bucket is 11.28ft in and length without bucket is 9.06ft in. Caterpillar 242B SERIES 3's height to top of cab is 6.63ft in. And its wheelbase is 3.59ft in.
Caterpillar 242B SERIES 3 Dimentions
| Length With Bucket: | 11.28ft in |
| Width Over Tires: | 5.5ft in |
| Ground Clearance: | 7in |
| Height to Top of Cab: | 6.63ft in |
| Wheelbase: | 3.59ft in |
| Length W/O Bucket: | 9.06ft in |
| Clearance at Max Lift and Dump: | 7.66ft in |
| Reach at Max Lift and Dump: | 24.49in |
| Length With Bucket on Ground: | 135.31in |
| Length Without Bucket: | 108.7in |
| Maximum Overall Height: | 154in |
| Rack back Angle Maxium Height: | 88 degrees |
| Maximum Dump Angle: | 50 degrees |
| Bucket Pin Height Carry Position: | 9in |
| Bucket Pin Height Maximum Lift: | 10.09ft in |
| Clearance at Maximum Lift and Dump: | 92in |
| Departure Angle: | 28 degrees |
| Height Top of Cab: | 6.59ft in |
| Turn Radius from Center Coupler: | 52in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 3.6ft in |
| Reach Maximum Life Dump: | 24in |
| Turn Radius from Center Bucket: | 82in |
Caterpillar 242B SERIES 3 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2200lb |
| Breakout Force Tilt Cylinder: | 4507lb |
| Rated Operating Capacity: | 2150lb |
| Tipping Load: | 4300lb |
Caterpillar 242B SERIES 3 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3.4 DIT |
| Gross Power: | 74hp |
| Displacement: | 201cu in |
| Bore: | 3.7in |
| Stroke: | 4.7in |
| Net Power: | 71hp |
| Net Flywheel Power: | 71hp |
Caterpillar 242B SERIES 3 Operational
| Fuel Capacity: | 15.4gal |
| Cooling System Fluid Capacity: | 2.7gal |
| Hydraulic System Fluid Capacity: | 14.6gal |
| Max Speed: | 11.5mph |
| Chain Box Fluid Capacity Each Side: | 1.6gal |
| Operating Speed: | 7.8mph |
Caterpillar 242B SERIES 3 Power Train
| Travel Speed Forward: | 7.7mph |
| Travel Speed Reverse: | 7.7mph |
Caterpillar 242B SERIES 3 Loader
| Breakout Force: | 4507lb |
| Operating Load Rating: | 2150lb |
| Tipping Angle: | 4300degrees |
Caterpillar 242B SERIES 3 Weights
| Operating Weight: | 7008lb |
Caterpillar 242B SERIES 3 Hydraulic
| Pump Flow Capacity: | 22gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 242B SERIES 3 Hydraulic System
| Loader Hydraulic Pressure: | 3335 psi |
| Hydraulic Power: | 42.8hp |
Caterpillar 242B SERIES 3 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 15.3gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.4gal |
| Hydraulic System: | 14.5gal |
| Chain Box Each Side: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 242B SERIES 3 Cab
| Cab Rops: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Cab Fops: | SAE J231 JAN81, ISO 3449:1992 Level II |
