Caterpillar 242B SERIES 2 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 242B SERIES 2 Specifications
Caterpillar 242B SERIES 2 Skid Steer Loader is equipped with Cat C2.2 T 61hp (gross power) engine. Combine value of all its cylinders is 134cu in (displacement).
Caterpillar 242B SERIES 2's fuel capacity is 15.3gal. It comes with 2.6gal and 14.5gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 242B SERIES 2 loader has 4060lb breakout force and 4200degrees tipping angle.
Its length with bucket is 11.28ft in and length without bucket is 9.06ft in. Caterpillar 242B SERIES 2's height to top of cab is 6.5ft in. And its wheelbase is 3.59ft in.
Caterpillar 242B SERIES 2 Dimentions
| Length With Bucket: | 11.28ft in |
| Width Over Tires: | 5.5ft in |
| Ground Clearance: | 7in |
| Height to Top of Cab: | 6.5ft in |
| Wheelbase: | 3.59ft in |
| Length W/O Bucket: | 9.06ft in |
| Clearance at Max Lift and Dump: | 7.33ft in |
| Reach at Max Lift and Dump: | 30.2in |
| Length With Bucket on Ground: | 135.31in |
| Length Without Bucket: | 108.7in |
| Maximum Overall Height: | 154.6in |
| Rack back Angle Maxium Height: | 86.9 degrees |
| Maximum Dump Angle: | 50 degrees |
| Bucket Pin Height Carry Position: | 11.8in |
| Bucket Pin Height Maximum Lift: | 10ft in |
| Clearance at Maximum Lift and Dump: | 88in |
| Departure Angle: | 28 degrees |
| Height Top of Cab: | 6.5ft in |
| Turn Radius from Center Coupler: | 56.5in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 3.6ft in |
| Reach Maximum Life Dump: | 30.2in |
| Turn Radius from Center Bucket: | 87.4in |
Caterpillar 242B SERIES 2 Operating Specifications
| Breakout Force Tilt Cylinder: | 4060lb |
| Rated Operating Capacity: | 2100lb |
| Tipping Load: | 4200lb |
Caterpillar 242B SERIES 2 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat C2.2 T |
| Gross Power: | 61hp |
| Displacement: | 134cu in |
| Bore: | 3.3in |
| Stroke: | 3.9in |
| Net Power: | 57hp |
| Net Flywheel Power: | 56hp |
Caterpillar 242B SERIES 2 Operational
| Fuel Capacity: | 15.3gal |
| Cooling System Fluid Capacity: | 2.6gal |
| Hydraulic System Fluid Capacity: | 14.5gal |
| Max Speed: | 6.8mph |
| Chain Box Fluid Capacity Each Side: | 1.6gal |
Caterpillar 242B SERIES 2 Power Train
| Travel Speed Forward: | 6.8mph |
| Travel Speed Reverse: | 6.8mph |
Caterpillar 242B SERIES 2 Loader
| Breakout Force: | 4060lb |
| Operating Load Rating: | 2100lb |
| Tipping Angle: | 4200degrees |
Caterpillar 242B SERIES 2 Weights
| Operating Weight: | 6914lb |
Caterpillar 242B SERIES 2 Hydraulic
| Pump Flow Capacity: | 15.6gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 242B SERIES 2 Hydraulic System
| Loader Hydraulic Pressure: | 3335 psi |
| Loader Hydraulic Flow: | 15.6 gal/min |
| Maximum Loader Hydraulic Pressure: | 3335 psi |
| Maximum Loader Hydraulic Flow: | 26 gal/min |
| Hydraulic Power: | 30.4hp |
Caterpillar 242B SERIES 2 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 15.3gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.6gal |
| Hydraulic System: | 14.5gal |
| Chain Box Each Side: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 242B SERIES 2 Cab
| Cab Rops: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Cab Fops: | SAE J231 JAN81, ISO 3449:1992 Level II |
