Caterpillar 242 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 242 Specifications
Caterpillar 242 Skid Steer Loader is equipped with Cat 3034C 58hp (gross power) engine. Combine value of all its cylinders is 183cu in (displacement).
Caterpillar 242's fuel capacity is 17.2gal. It comes with 14.6gal hydraulic system fluid capacity respectively.
Caterpillar 242 loader has 3770degrees tipping angle.
Its length with bucket is 11.28ft in and length without bucket is 9.11ft in. Caterpillar 242's height to top of cab is 6.52ft in. And its wheelbase is 3.73ft in.
Caterpillar 242 Dimentions
| Length With Bucket: | 11.28ft in |
| Width Over Tires: | 5.01ft in |
| Ground Clearance: | 7in |
| Height to Top of Cab: | 6.52ft in |
| Wheelbase: | 3.73ft in |
| Length W/O Bucket: | 9.11ft in |
| Clearance at Max Lift and Dump: | 7.47ft in |
| Reach at Max Lift and Dump: | 30.16in |
| Length With Bucket on Ground: | 135.31in |
| Length Without Bucket: | 109.3in |
| Maximum Overall Height: | 154.6in |
| Bucket Pin Height Carry Position: | 11.8in |
| Bucket Pin Height Maximum Lift: | 10ft in |
| Clearance at Maximum Lift and Dump: | 88.2in |
| Height Top of Cab: | 6.52ft in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 3.59ft in |
| Reach Maximum Life Dump: | 29.9in |
Caterpillar 242 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2047lb |
| Breakout Force Tilt Cylinder: | 4056lb |
| Rated Operating Capacity: | 2000lb |
| Tipping Load: | 4000lb |
Caterpillar 242 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3034C |
| Gross Power: | 58hp |
| Displacement: | 183cu in |
| Bore: | 3.9in |
| Stroke: | 4in |
| Net Power: | 54hp |
| Net Flywheel Power: | 54hp |
Caterpillar 242 Operational
| Fuel Capacity: | 17.2gal |
| Hydraulic System Fluid Capacity: | 14.6gal |
| Max Speed: | 6.9mph |
| Operating Speed: | 6.9mph |
Caterpillar 242 Loader
| Operating Load Rating: | 2000lb |
| Tipping Angle: | 3770degrees |
Caterpillar 242 Weights
| Operating Weight: | 6858.5lb |
Caterpillar 242 Hydraulic
| Pump Flow Capacity: | 15.2gal/min |
Caterpillar 242 Hydraulic System
| Loader Hydraulic Pressure: | 3300 psi |
| Loader Hydraulic Flow: | 15.1 gal/min |
Caterpillar 242 Service Refill Capacities
| Cooling System: | 24gal |
| Fuel Tank: | 18.2gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.1gal |
| Hydraulic System: | 15.3gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 242 Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
