Caterpillar 236D Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 236D Specifications
Caterpillar 236D Skid Steer Loader is equipped with Cat C3.3B DIT (turbo) 74.3hp (gross power) engine. Combine value of all its cylinders is 203cu in (displacement).
Caterpillar 236D's fuel capacity is 27.7gal. It comes with 3.7gal and 13.2gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 236D loader has 5074lb breakout force and 3600degrees tipping angle.
Its length with bucket is 11.45ft in and length without bucket is 9.08ft in. Caterpillar 236D's height to top of cab is 6.83ft in. And its wheelbase is 3.63ft in.
Caterpillar 236D Dimentions
| Length With Bucket: | 11.45ft in |
| Width Over Tires: | 5.5ft in |
| Ground Clearance: | 7.7in |
| Height to Top of Cab: | 6.83ft in |
| Wheelbase: | 3.63ft in |
| Length W/O Bucket: | 9.08ft in |
| Clearance at Max Lift and Dump: | 7.75ft in |
| Reach at Max Lift and Dump: | 16in |
| Length With Bucket on Ground: | 137.31in |
| Length Without Bucket: | 108.9in |
| Maximum Overall Height: | 156.6in |
| Maximum Reach with Arms Paraller to Ground: | 53.3in |
| Rack back Angle Maxium Height: | 91 degrees |
| Maximum Dump Angle: | 48 degrees |
| Bucket Pin Height Carry Position: | 7.5in |
| Bucket Pin Height Maximum Lift: | 10.25ft in |
| Bumper Overhang Behind Rear Axle: | 40.21in |
| Clearance at Maximum Lift and Dump: | 92.9in |
| Departure Angle: | 26 degrees |
| Height Top of Cab: | 6.84ft in |
| Turn Radius from Center Coupler: | 51.8in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 3.63ft in |
| Reach Maximum Life Dump: | 16in |
| Turn Radius from Center Bucket: | 83in |
Caterpillar 236D Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2000lb |
| Breakout Force Tilt Cylinder: | 5074lb |
| Rated Operating Capacity: | 1800lb |
| Tipping Load: | 3600lb |
Caterpillar 236D Engine
| Engine Make: | 2236 |
| Engine Model: | Cat C3.3B DIT (turbo) |
| Gross Power: | 74.3hp |
| Displacement: | 203cu in |
| Bore: | 3.7in |
| Stroke: | 4.7in |
| Net Flywheel Power: | 73.2hp |
Caterpillar 236D Operational
| Fuel Capacity: | 27.7gal |
| Cooling System Fluid Capacity: | 3.7gal |
| Hydraulic System Fluid Capacity: | 13.2gal |
| Max Speed: | 10.6mph |
| Chain Box Fluid Capacity Each Side: | 2.3gal |
| Operating Speed: | 7mph |
Caterpillar 236D Loader
| Breakout Force: | 5074lb |
| Tipping Angle: | 3600degrees |
Caterpillar 236D Weights
| Operating Weight: | 6559lb |
Caterpillar 236D Hydraulic
| Pump Flow Capacity: | 20gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 236D Service Refill Capacities
| Cooling System: | 3.7gal |
| Fuel Tank: | 27.7gal |
| Hydraulic Tank: | 10.3gal |
| Engine Crankcase: | 3gal |
| Hydraulic System: | 13.2gal |
| Chain Box Each Side: | ISO 3471:2008 |
Caterpillar 236D Cab
| Cab Rops: | ISO 3449:2005 Level I |
| Cab Fops: | ISO 3449:2005 Level II |
