Caterpillar 236B SERIES 3 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 236B SERIES 3 Specifications
Caterpillar 236B SERIES 3 Skid Steer Loader is equipped with Cat C3.4 DIT 74hp (gross power) engine. Combine value of all its cylinders is 201cu in (displacement).
Caterpillar 236B SERIES 3's fuel capacity is 23.8gal. It comes with 2.7gal and 13.8gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 236B SERIES 3 loader has 5484lb breakout force and 3900degrees tipping angle.
Its length with bucket is 11.54ft in and length without bucket is 9.19ft in. Caterpillar 236B SERIES 3's height to top of cab is 6.87ft in. And its wheelbase is 3.73ft in.
Caterpillar 236B SERIES 3 Dimentions
| Length With Bucket: | 11.54ft in |
| Width Over Tires: | 5.5ft in |
| Ground Clearance: | 9.31in |
| Height to Top of Cab: | 6.87ft in |
| Wheelbase: | 3.73ft in |
| Length W/O Bucket: | 9.19ft in |
| Clearance at Max Lift and Dump: | 7.87ft in |
| Reach at Max Lift and Dump: | 21.3in |
| Length With Bucket on Ground: | 138in |
| Length Without Bucket: | 110in |
| Maximum Overall Height: | 156in |
| Rack back Angle Maxium Height: | 83 degrees |
| Maximum Dump Angle: | 40 degrees |
| Bucket Pin Height Carry Position: | 8.4in |
| Bucket Pin Height Maximum Lift: | 10.17ft in |
| Clearance at Maximum Lift and Dump: | 94in |
| Departure Angle: | 28 degrees |
| Height Top of Cab: | 6.84ft in |
| Turn Radius from Center Coupler: | 52in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 3.75ft in |
| Reach Maximum Life Dump: | 21in |
| Turn Radius from Center Bucket: | 82in |
Caterpillar 236B SERIES 3 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 2050lb |
| Breakout Force Tilt Cylinder: | 5484lb |
| Rated Operating Capacity: | 1950lb |
| Tipping Load: | 3900lb |
Caterpillar 236B SERIES 3 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat C3.4 DIT |
| Gross Power: | 74hp |
| Displacement: | 201cu in |
| Bore: | 3.7in |
| Stroke: | 4.7in |
| Net Power: | 71hp |
| Net Flywheel Power: | 71hp |
Caterpillar 236B SERIES 3 Operational
| Fuel Capacity: | 23.8gal |
| Cooling System Fluid Capacity: | 2.7gal |
| Hydraulic System Fluid Capacity: | 13.8gal |
| Max Speed: | 11.3mph |
| Chain Box Fluid Capacity Each Side: | 1.9gal |
| Operating Speed: | 7.6mph |
Caterpillar 236B SERIES 3 Power Train
| Travel Speed Forward: | 7.5mph |
| Travel Speed Reverse: | 7.5mph |
Caterpillar 236B SERIES 3 Loader
| Breakout Force: | 5484lb |
| Operating Load Rating: | 1950lb |
| Tipping Angle: | 3900degrees |
Caterpillar 236B SERIES 3 Weights
| Operating Weight: | 7007lb |
Caterpillar 236B SERIES 3 Hydraulic
| Pump Flow Capacity: | 22gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 236B SERIES 3 Hydraulic System
| Loader Hydraulic Pressure: | 3335 psi |
| Loader Hydraulic Flow: | 22 gal/min |
| Hydraulic Power: | 42.8hp |
| Hydraulic Flow: | Standard |
Caterpillar 236B SERIES 3 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 23.8gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.4gal |
| Hydraulic System: | 13.7gal |
| Chain Box Each Side: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 236B SERIES 3 Cab
| Cab Rops: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Cab Fops: | SAE J231 JAN81, ISO 3449:1992 Level II |
