Caterpillar 236 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 236 Specifications
Caterpillar 236 Skid Steer Loader is equipped with Cat 3034C 63hp (gross power) engine. Combine value of all its cylinders is 183cu in (displacement).
Caterpillar 236's fuel capacity is 23.8gal. It comes with 13.8gal hydraulic system fluid capacity respectively.
Caterpillar 236 loader has 3440degrees tipping angle.
Its length with bucket is 11.8ft in and length without bucket is 9.19ft in. Caterpillar 236's height to top of cab is 6.87ft in. And its wheelbase is 3.73ft in.
Caterpillar 236 Dimentions
| Length With Bucket: | 11.8ft in |
| Width Over Tires: | 6.01ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.87ft in |
| Wheelbase: | 3.73ft in |
| Length W/O Bucket: | 9.19ft in |
| Clearance at Max Lift and Dump: | 7.87ft in |
| Reach at Max Lift and Dump: | 23.12in |
| Length With Bucket on Ground: | 138in |
| Length Without Bucket: | 110in |
| Maximum Overall Height: | 156in |
| Bucket Pin Height Carry Position: | 10in |
| Bucket Pin Height Maximum Lift: | 10.17ft in |
| Clearance at Maximum Lift and Dump: | 94in |
| Height Top of Cab: | 6.84ft in |
| Vehicle Width Over Height: | 66in |
| Wheel Base: | 3.73ft in |
| Reach Maximum Life Dump: | 21in |
Caterpillar 236 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 1850lb |
| Breakout Force Tilt Cylinder: | 5255lb |
| Rated Operating Capacity: | 1750lb |
| Tipping Load: | 3500lb |
Caterpillar 236 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3034C |
| Gross Power: | 63hp |
| Displacement: | 183cu in |
| Bore: | 3.9in |
| Stroke: | 4in |
| Net Power: | 59hp |
| Net Flywheel Power: | 44hp |
Caterpillar 236 Operational
| Fuel Capacity: | 23.8gal |
| Hydraulic System Fluid Capacity: | 13.8gal |
| Max Speed: | 6.9mph |
| Operating Speed: | 7.6mph |
Caterpillar 236 Loader
| Operating Load Rating: | 1750lb |
| Tipping Angle: | 3440degrees |
Caterpillar 236 Weights
| Operating Weight: | 6810lb |
Caterpillar 236 Hydraulic
| Pump Flow Capacity: | 22gal/min |
Caterpillar 236 Hydraulic System
| Loader Hydraulic Pressure: | 3300 psi |
| Loader Hydraulic Flow: | 22 gal/min |
| Hydraulic Flow: | Standard flow |
Caterpillar 236 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 23.8gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 1.8gal |
| Hydraulic System: | 13.7gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 236 Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
