Caterpillar 232B SERIES 2 Skid Steer Loader

Caterpillar 232B SERIES 2 Skid Steer Loader

Skid Steer Loader // Caterpillar

Caterpillar 232B SERIES 2 Specifications

Caterpillar 232B SERIES 2 Skid Steer Loader is equipped with Cat C2.2 T 61hp (gross power) engine. Combine value of all its cylinders is 134cu in (displacement).

Caterpillar 232B SERIES 2's fuel capacity is 15.3gal. It comes with 2.6gal and 14.5gal cooling system fluid capacity and hydraulic system fluid capacity respectively.

Caterpillar 232B SERIES 2 loader has 4060lb breakout force and 3956degrees tipping angle.

Its length with bucket is 11.25ft in and length without bucket is 9.06ft in. Caterpillar 232B SERIES 2's height to top of cab is 6.42ft in. And its wheelbase is 3.58ft in.

Caterpillar 232B SERIES 2 Dimentions

Length With Bucket: 11.25ft in
Width Over Tires: 5ft in
Ground Clearance: 5.7in
Height to Top of Cab: 6.42ft in
Wheelbase: 3.58ft in
Length W/O Bucket: 9.06ft in
Clearance at Max Lift and Dump: 7.36ft in
Reach at Max Lift and Dump: 30in
Length With Bucket on Ground: 135in
Length Without Bucket: 108.7in
Maximum Overall Height: 153.31in
Rack back Angle Maxium Height: 86.9 degrees
Maximum Dump Angle: 50 degrees
Bucket Pin Height Carry Position: 9.7in
Bucket Pin Height Maximum Lift: 9.89ft in
Clearance at Maximum Lift and Dump: 88.3in
Departure Angle: 28 degrees
Height Top of Cab: 6.42ft in
Turn Radius from Center Coupler: 56.5in
Vehicle Width Over Height: 60in
Wheel Base: 3.59ft in
Reach Maximum Life Dump: 30in
Turn Radius from Center Bucket: 87.4in

Caterpillar 232B SERIES 2 Operating Specifications

Rated Operating Capacity with Optionak Counterweight: 1945lb
Breakout Force Tilt Cylinder: 4060lb
Rated Operating Capacity: 1900lb
Tipping Load: 3956lb

Caterpillar 232B SERIES 2 Engine

Engine Make: 2236
Engine Model: Cat C2.2 T
Gross Power: 61hp
Displacement: 134cu in
Bore: 3.3in
Stroke: 3.9in
Net Power: 57hp
Net Flywheel Power: 56hp

Caterpillar 232B SERIES 2 Operational

Fuel Capacity: 15.3gal
Cooling System Fluid Capacity: 2.6gal
Hydraulic System Fluid Capacity: 14.5gal
Max Speed: 6.8mph
Chain Box Fluid Capacity Each Side: 1.6gal

Caterpillar 232B SERIES 2 Power Train

Travel Speed Forward: 6.8mph
Travel Speed Reverse: 6.8mph

Caterpillar 232B SERIES 2 Loader

Breakout Force: 4060lb
Operating Load Rating: 1900lb
Tipping Angle: 3956degrees

Caterpillar 232B SERIES 2 Weights

Operating Weight: 6737lb

Caterpillar 232B SERIES 2 Hydraulic

Pump Flow Capacity: 15.6gal/min
Relief Valve Pressure: 3335psi

Caterpillar 232B SERIES 2 Hydraulic System

Loader Hydraulic Pressure: 3335 psi
Loader Hydraulic Flow: 15.6 gal/min
Hydraulic Power: 30.4hp
Hydraulic Flow: Standard

Caterpillar 232B SERIES 2 Service Refill Capacities

Cooling System: 2.6gal
Fuel Tank: 15.3gal
Hydraulic Tank: 9.2gal
Engine Crankcase: 2.6gal
Hydraulic System: 14.5gal
Chain Box Each Side: SAE J1040 MAY94, ISO 3471:1994

Caterpillar 232B SERIES 2 Cab

Cab Rops: SAE J1043 SEPT87, ISO 3449:1992 Level I
Cab Fops: SAE J231 JAN81, ISO 3449:1992 Level II
We Help Industry To Utilize The
Heavy Equipment Work Better