Caterpillar 232 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 232 Specifications
Caterpillar 232 Skid Steer Loader is equipped with Cat 3034C 51hp (gross power) engine. Combine value of all its cylinders is 134cu in (displacement).
Caterpillar 232's fuel capacity is 17.2gal. It comes with 14.6gal hydraulic system fluid capacity respectively.
Caterpillar 232 loader has 3633degrees tipping angle.
Its length with bucket is 11.28ft in and length without bucket is 9.06ft in. Caterpillar 232's height to top of cab is 6.4ft in. And its wheelbase is 3.59ft in.
Caterpillar 232 Dimentions
| Length With Bucket: | 11.28ft in |
| Width Over Tires: | 5.01ft in |
| Ground Clearance: | 5.7in |
| Height to Top of Cab: | 6.4ft in |
| Wheelbase: | 3.59ft in |
| Length W/O Bucket: | 9.06ft in |
| Clearance at Max Lift and Dump: | 7.62ft in |
| Reach at Max Lift and Dump: | 30.16in |
| Length With Bucket on Ground: | 135.31in |
| Length Without Bucket: | 109.3in |
| Maximum Overall Height: | 153.31in |
| Bucket Pin Height Carry Position: | 9.7in |
| Bucket Pin Height Maximum Lift: | 9.89ft in |
| Clearance at Maximum Lift and Dump: | 86.9in |
| Height Top of Cab: | 6.41ft in |
| Vehicle Width Over Height: | 60in |
| Wheel Base: | 3.59ft in |
| Reach Maximum Life Dump: | 28.5in |
Caterpillar 232 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 1795lb |
| Breakout Force Tilt Cylinder: | 4056lb |
| Rated Operating Capacity: | 1750lb |
| Tipping Load: | 3500lb |
Caterpillar 232 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3034C |
| Gross Power: | 51hp |
| Displacement: | 134cu in |
| Bore: | 3.4in |
| Stroke: | 4in |
| Net Power: | 48hp |
| Net Flywheel Power: | 48hp |
Caterpillar 232 Operational
| Fuel Capacity: | 17.2gal |
| Hydraulic System Fluid Capacity: | 14.6gal |
| Max Speed: | 6.2mph |
| Operating Speed: | 6.2mph |
Caterpillar 232 Loader
| Operating Load Rating: | 1750lb |
| Tipping Angle: | 3633degrees |
Caterpillar 232 Weights
| Operating Weight: | 6739.5lb |
Caterpillar 232 Hydraulic
| Pump Flow Capacity: | 14.6gal/min |
Caterpillar 232 Hydraulic System
| Loader Hydraulic Pressure: | 3100 psi |
| Loader Hydraulic Flow: | 14.7 gal/min |
Caterpillar 232 Service Refill Capacities
| Cooling System: | 2.4gal |
| Fuel Tank: | 18.2gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.1gal |
| Hydraulic System: | 15.3gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 232 Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
