Caterpillar 228 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 228 Specifications
Caterpillar 228 Skid Steer Loader is equipped with Cat 3034C 58hp (gross power) engine. Combine value of all its cylinders is 183cu in (displacement).
Caterpillar 228's fuel capacity is 17.2gal. It comes with 14.6gal hydraulic system fluid capacity respectively.
Caterpillar 228 loader has 2800degrees tipping angle.
Its length with bucket is 10.61ft in and length without bucket is 8.27ft in. Caterpillar 228's height to top of cab is 6.4ft in. And its wheelbase is 3.24ft in.
Caterpillar 228 Dimentions
| Length With Bucket: | 10.61ft in |
| Width Over Tires: | 5.01ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.4ft in |
| Wheelbase: | 3.24ft in |
| Length W/O Bucket: | 8.27ft in |
| Clearance at Max Lift and Dump: | 7.12ft in |
| Reach at Max Lift and Dump: | 22.05in |
| Length With Bucket on Ground: | 127in |
| Length Without Bucket: | 99in |
| Maximum Overall Height: | 146in |
| Bucket Pin Height Carry Position: | 9in |
| Bucket Pin Height Maximum Lift: | 9.34ft in |
| Clearance at Maximum Lift and Dump: | 84in |
| Height Top of Cab: | 6.42ft in |
| Vehicle Width Over Height: | 60in |
| Wheel Base: | 3.24ft in |
| Reach Maximum Life Dump: | 20in |
Caterpillar 228 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 1600lb |
| Breakout Force Tilt Cylinder: | 3907lb |
| Rated Operating Capacity: | 1500lb |
| Tipping Load: | 3000lb |
Caterpillar 228 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3034C |
| Gross Power: | 58hp |
| Displacement: | 183cu in |
| Bore: | 3.9in |
| Stroke: | 4in |
| Net Power: | 54hp |
| Net Flywheel Power: | 41hp |
Caterpillar 228 Operational
| Fuel Capacity: | 17.2gal |
| Hydraulic System Fluid Capacity: | 14.6gal |
| Max Speed: | 6.9mph |
| Operating Speed: | 6.9mph |
Caterpillar 228 Loader
| Operating Load Rating: | 1500lb |
| Tipping Angle: | 2800degrees |
Caterpillar 228 Weights
| Operating Weight: | 5843lb |
Caterpillar 228 Hydraulic
| Pump Flow Capacity: | 30.2gal/min |
Caterpillar 228 Hydraulic System
| Loader Hydraulic Pressure: | 3300 psi |
| Loader Hydraulic Flow: | 30 gal/min |
| Hydraulic Flow: | Standard flow |
Caterpillar 228 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 17gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 1.8gal |
| Hydraulic System: | 14.5gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 228 Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
