Caterpillar 226B SERIES 3 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 226B SERIES 3 Specifications
Caterpillar 226B SERIES 3 Skid Steer Loader is equipped with Cat C2.2 T 61hp (gross power) engine. Combine value of all its cylinders is 134cu in (displacement).
Caterpillar 226B SERIES 3's fuel capacity is 15.4gal. It comes with 2.7gal and 14.6gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 226B SERIES 3 loader has 4083lb breakout force and 3000degrees tipping angle.
Its length with bucket is 10.61ft in and length without bucket is 8.27ft in. Caterpillar 226B SERIES 3's height to top of cab is 6.4ft in. And its wheelbase is 3.24ft in.
Caterpillar 226B SERIES 3 Dimentions
| Length With Bucket: | 10.61ft in |
| Width Over Tires: | 5.01ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.4ft in |
| Wheelbase: | 3.24ft in |
| Length W/O Bucket: | 8.27ft in |
| Clearance at Max Lift and Dump: | 7.12ft in |
| Reach at Max Lift and Dump: | 19.89in |
| Length With Bucket on Ground: | 127in |
| Length Without Bucket: | 99in |
| Maximum Overall Height: | 146in |
| Rack back Angle Maxium Height: | 81 degrees |
| Maximum Dump Angle: | 40 degrees |
| Bucket Pin Height Carry Position: | 8in |
| Bucket Pin Height Maximum Lift: | 9.34ft in |
| Clearance at Maximum Lift and Dump: | 85.4in |
| Departure Angle: | 26 degrees |
| Height Top of Cab: | 6.42ft in |
| Turn Radius from Center Coupler: | 47in |
| Vehicle Width Over Height: | 60in |
| Wheel Base: | 3.25ft in |
| Reach Maximum Life Dump: | 20in |
| Turn Radius from Center Bucket: | 77in |
Caterpillar 226B SERIES 3 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 1600lb |
| Breakout Force Tilt Cylinder: | 4083lb |
| Rated Operating Capacity: | 1500lb |
| Tipping Load: | 3000lb |
Caterpillar 226B SERIES 3 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat C2.2 T |
| Gross Power: | 61hp |
| Displacement: | 134cu in |
| Bore: | 3.3in |
| Stroke: | 3.9in |
| Net Power: | 56hp |
| Net Flywheel Power: | 56hp |
Caterpillar 226B SERIES 3 Operational
| Fuel Capacity: | 15.4gal |
| Cooling System Fluid Capacity: | 2.7gal |
| Hydraulic System Fluid Capacity: | 14.6gal |
| Chain Box Fluid Capacity Each Side: | 1.6gal |
| Operating Speed: | 7.9mph |
Caterpillar 226B SERIES 3 Power Train
| Travel Speed Forward: | 7.9mph |
| Travel Speed Reverse: | 7.9mph |
Caterpillar 226B SERIES 3 Loader
| Breakout Force: | 4083lb |
| Operating Load Rating: | 1500lb |
| Tipping Angle: | 3000degrees |
Caterpillar 226B SERIES 3 Weights
| Operating Weight: | 5822lb |
Caterpillar 226B SERIES 3 Hydraulic
| Pump Flow Capacity: | 16gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 226B SERIES 3 Hydraulic System
| Loader Hydraulic Pressure: | 3335 psi |
| Maximum Loader Hydraulic Pressure: | 3335 psi |
| Maximum Loader Hydraulic Flow: | 27 gal/min |
Caterpillar 226B SERIES 3 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 15.4gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.6gal |
| Hydraulic System: | 14.5gal |
| Chain Box Each Side: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 226B SERIES 3 Cab
| Cab Rops: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Cab Fops: | SAE J231 JAN81, ISO 3449:1992 Level II |
