Caterpillar 216B Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 216B Specifications
Caterpillar 216B Skid Steer Loader is equipped with Cat 3024C 52hp (gross power) engine.
Caterpillar 216B's fuel capacity is 17.2gal. It comes with 2.7gal and 14.6gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 216B loader has 3785.4lb breakout force and 2799.9degrees tipping angle.
Its length with bucket is 10.61ft in and length without bucket is 8.27ft in. Caterpillar 216B's height to top of cab is 6.4ft in. And its wheelbase is 3.24ft in.
Caterpillar 216B Dimentions
| Length With Bucket: | 10.61ft in |
| Width Over Tires: | 5.01ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.4ft in |
| Wheelbase: | 3.24ft in |
| Length W/O Bucket: | 8.27ft in |
| Clearance at Max Lift and Dump: | 7.12ft in |
| Reach at Max Lift and Dump: | 19.89in |
| Length With Bucket on Ground: | 127in |
| Length Without Bucket: | 99in |
| Maximum Overall Height: | 146in |
| Bucket Pin Height Carry Position: | 9.31in |
| Bucket Pin Height Maximum Lift: | 9.34ft in |
| Clearance at Maximum Lift and Dump: | 85in |
| Height Top of Cab: | 6.42ft in |
| Turn Radius from Center Coupler: | 47.2in |
| Vehicle Width Over Height: | 60in |
| Wheel Base: | 3.25ft in |
| Reach Maximum Life Dump: | 20in |
| Turn Radius from Center Bucket: | 76.41in |
Caterpillar 216B Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 1500lb |
| Breakout Force Tilt Cylinder: | 3787lb |
| Rated Operating Capacity: | 1400lb |
| Tipping Load: | 2800lb |
Caterpillar 216B Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3024C |
| Gross Power: | 52hp |
| Bore: | 3.3in |
| Stroke: | 3.9in |
| Net Power: | 49.7hp |
| Net Flywheel Power: | 49hp |
Caterpillar 216B Operational
| Fuel Capacity: | 17.2gal |
| Cooling System Fluid Capacity: | 2.7gal |
| Hydraulic System Fluid Capacity: | 14.6gal |
| Max Speed: | 7.8mph |
| Chain Box Fluid Capacity Each Side: | 1.6gal |
| Tire Size: | 10x16.5 6PR |
Caterpillar 216B Power Train
| Travel Speed Forward: | 7.9mph |
| Travel Speed Reverse: | 7.9mph |
Caterpillar 216B Loader
| Breakout Force: | 3785.4lb |
| Operating Load Rating: | 1400lb |
| Tipping Angle: | 2799.9degrees |
Caterpillar 216B Weights
| Operating Weight: | 5709lb |
Caterpillar 216B Hydraulic
| Pump Flow Capacity: | 15.9gal/min |
| Relief Valve Pressure: | 3103.9psi |
Caterpillar 216B Hydraulic System
| Loader Hydraulic Pressure: | 3100 psi |
| Loader Hydraulic Flow: | 15.6 gal/min |
| Hydraulic Power: | 28.2hp |
| Hydraulic Flow: | Standard flow |
Caterpillar 216B Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 17gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.1gal |
| Hydraulic System: | 14.5gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 216B Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
