Caterpillar 216B SERIES 2 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 216B SERIES 2 Specifications
Caterpillar 216B SERIES 2 Skid Steer Loader is equipped with Cat C2.2 51hp (gross power) engine. Combine value of all its cylinders is 134cu in (displacement).
Caterpillar 216B SERIES 2's fuel capacity is 15.4gal. It comes with 2.6gal and 14.5gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Caterpillar 216B SERIES 2 loader has 4083lb breakout force and 2800degrees tipping angle.
Its length with bucket is 10.58ft in and length without bucket is 8.25ft in. Caterpillar 216B SERIES 2's height to top of cab is 6.42ft in. And its wheelbase is 3.25ft in.
Caterpillar 216B SERIES 2 Dimentions
| Length With Bucket: | 10.58ft in |
| Width Over Tires: | 5ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.42ft in |
| Wheelbase: | 3.25ft in |
| Length W/O Bucket: | 8.25ft in |
| Clearance at Max Lift and Dump: | 7.08ft in |
| Reach at Max Lift and Dump: | 20in |
| Length With Bucket on Ground: | 127in |
| Length Without Bucket: | 99in |
| Maximum Overall Height: | 146in |
| Rack back Angle Maxium Height: | 96.7 degrees |
| Maximum Dump Angle: | 40 degrees |
| Bucket Pin Height Carry Position: | 9.31in |
| Bucket Pin Height Maximum Lift: | 9.34ft in |
| Clearance at Maximum Lift and Dump: | 85in |
| Departure Angle: | 26 degrees |
| Height Top of Cab: | 6.42ft in |
| Turn Radius from Center Coupler: | 47.2in |
| Vehicle Width Over Height: | 60in |
| Wheel Base: | 3.25ft in |
| Reach Maximum Life Dump: | 20in |
| Turn Radius from Center Bucket: | 76.41in |
Caterpillar 216B SERIES 2 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 1500lb |
| Breakout Force Tilt Cylinder: | 4083lb |
| Rated Operating Capacity: | 1400lb |
| Tipping Load: | 2800lb |
Caterpillar 216B SERIES 2 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat C2.2 |
| Gross Power: | 51hp |
| Displacement: | 134cu in |
| Bore: | 3.3in |
| Stroke: | 3.9in |
| Net Power: | 49hp |
| Net Flywheel Power: | 47hp |
Caterpillar 216B SERIES 2 Operational
| Fuel Capacity: | 15.4gal |
| Cooling System Fluid Capacity: | 2.6gal |
| Hydraulic System Fluid Capacity: | 14.5gal |
| Max Speed: | 7mph |
| Chain Box Fluid Capacity Each Side: | 1.6gal |
Caterpillar 216B SERIES 2 Power Train
| Travel Speed Forward: | 7mph |
| Travel Speed Reverse: | 7mph |
Caterpillar 216B SERIES 2 Loader
| Breakout Force: | 4083lb |
| Operating Load Rating: | 1400lb |
| Tipping Angle: | 2800degrees |
Caterpillar 216B SERIES 2 Weights
| Operating Weight: | 5609lb |
Caterpillar 216B SERIES 2 Hydraulic
| Pump Flow Capacity: | 15.6gal/min |
| Relief Valve Pressure: | 3335psi |
Caterpillar 216B SERIES 2 Hydraulic System
| Loader Hydraulic Pressure: | 3335 psi |
| Loader Hydraulic Flow: | 15.6 gal/min |
| Hydraulic Power: | 30.4hp |
| Hydraulic Flow: | Standard |
Caterpillar 216B SERIES 2 Service Refill Capacities
| Cooling System: | 2.6gal |
| Fuel Tank: | 15.4gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.6gal |
| Hydraulic System: | 14.5gal |
| Chain Box Each Side: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 216B SERIES 2 Cab
| Cab Rops: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Cab Fops: | SAE J231 JAN81, ISO 3449:1992 Level II |
