Caterpillar 216 Skid Steer Loader
Skid Steer Loader // Caterpillar
Caterpillar 216 Specifications
Caterpillar 216 Skid Steer Loader is equipped with Cat 3024C 51hp (gross power) engine. Combine value of all its cylinders is 134cu in (displacement).
Caterpillar 216's fuel capacity is 17.2gal. It comes with 14.6gal hydraulic system fluid capacity respectively.
Caterpillar 216 loader has 2600degrees tipping angle.
Its length with bucket is 10.88ft in and length without bucket is 8.27ft in. Caterpillar 216's height to top of cab is 6.4ft in. And its wheelbase is 3.24ft in.
Caterpillar 216 Dimentions
| Length With Bucket: | 10.88ft in |
| Width Over Tires: | 6.01ft in |
| Ground Clearance: | 7.7in |
| Height to Top of Cab: | 6.4ft in |
| Wheelbase: | 3.24ft in |
| Length W/O Bucket: | 8.27ft in |
| Clearance at Max Lift and Dump: | 7.12ft in |
| Reach at Max Lift and Dump: | 21.5in |
| Length With Bucket on Ground: | 127in |
| Length Without Bucket: | 99in |
| Maximum Overall Height: | 146in |
| Bucket Pin Height Carry Position: | 9.31in |
| Bucket Pin Height Maximum Lift: | 9.37ft in |
| Clearance at Maximum Lift and Dump: | 85.4in |
| Height Top of Cab: | 6.42ft in |
| Vehicle Width Over Height: | 60in |
| Wheel Base: | 3.24ft in |
| Reach Maximum Life Dump: | 20in |
Caterpillar 216 Operating Specifications
| Rated Operating Capacity with Optionak Counterweight: | 1500lb |
| Breakout Force Tilt Cylinder: | 3612lb |
| Rated Operating Capacity: | 1400lb |
| Tipping Load: | 2800lb |
Caterpillar 216 Engine
| Engine Make: | 2236 |
| Engine Model: | Cat 3024C |
| Gross Power: | 51hp |
| Displacement: | 134cu in |
| Bore: | 3.4in |
| Stroke: | 4in |
| Net Power: | 48hp |
| Net Flywheel Power: | 48hp |
Caterpillar 216 Operational
| Fuel Capacity: | 17.2gal |
| Hydraulic System Fluid Capacity: | 14.6gal |
| Max Speed: | 7mph |
| Operating Speed: | 7mph |
Caterpillar 216 Loader
| Operating Load Rating: | 1400lb |
| Tipping Angle: | 2600degrees |
Caterpillar 216 Weights
| Operating Weight: | 5490lb |
Caterpillar 216 Hydraulic
| Pump Flow Capacity: | 15.2gal/min |
Caterpillar 216 Hydraulic System
| Loader Hydraulic Pressure: | 3100 psi |
| Loader Hydraulic Flow: | 14.7 gal/min |
| Hydraulic Flow: | Standard flow |
Caterpillar 216 Service Refill Capacities
| Cooling System: | 2.4gal |
| Fuel Tank: | 17gal |
| Hydraulic Tank: | 9.2gal |
| Engine Crankcase: | 2.1gal |
| Hydraulic System: | 14.5gal |
| Chain Box Each Side: | SAE J1040 MAY94 and ISO3471:1994 |
Caterpillar 216 Cab
| Cab Rops: | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Cab Fops: | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
