Case SR250 Skid Steer Loader
Skid Steer Loader // Case
Case SR250 Specifications
Case SR250 Skid Steer Loader is equipped with 432T/M3 90hp (gross power) engine. Combine value of all its cylinders is 195cu in (displacement).
Case SR250's fuel capacity is 25.5gal. It comes with 6gal hydraulic system fluid capacity respectively.
Case SR250 loader has 5000degrees tipping angle.
Its length with bucket is 11.82ft in and length without bucket is 9.85ft in. Case SR250's height to top of cab is 6.57ft in. And its wheelbase is 4.27ft in.
Case SR250 Dimentions
| Length With Bucket: | 11.82ft in |
| Width Over Tires: | 5.91ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.57ft in |
| Wheelbase: | 4.27ft in |
| Length W/O Bucket: | 9.85ft in |
| Clearance at Max Lift and Dump: | 8.54ft in |
| Reach at Max Lift and Dump: | 19.5in |
Case SR250 Engine
| Engine Make: | 2239 |
| Engine Model: | 432T/M3 |
| Gross Power: | 90hp |
| Displacement: | 195cu in |
| Net Power: | 84hp |
Case SR250 Operational
| Fuel Capacity: | 25.5gal |
| Hydraulic System Fluid Capacity: | 6gal |
| Max Speed: | 11.9mph |
| Chain Box Fluid Capacity Each Side: | 2gal |
| Operating Speed: | 7.2mph |
| Tire Size: | 12 x 16.5 |
Case SR250 Loader
| Bucket Width: | 72in |
| Operating Load Rating: | 2500lb |
| Tipping Angle: | 5000degrees |
Case SR250 Hydraulic
| Pump Flow Capacity: | 12.2gal/min |
| Relief Valve Pressure: | 3000psi |
