Case SR200 Skid Steer Loader
Skid Steer Loader // Case
Case SR200 Specifications
Case SR200 Skid Steer Loader is equipped with 432T/M3 74hp (gross power) engine. Combine value of all its cylinders is 195cu in (displacement).
Case SR200's fuel capacity is 20gal. It comes with 5.3gal hydraulic system fluid capacity respectively.
Case SR200 loader has 4000degrees tipping angle.
Its length with bucket is 10.83ft in and length without bucket is 8.76ft in. Case SR200's height to top of cab is 6.57ft in. And its wheelbase is 3.71ft in.
Case SR200 Dimentions
| Length With Bucket: | 10.83ft in |
| Width Over Tires: | 5.35ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.57ft in |
| Wheelbase: | 3.71ft in |
| Length W/O Bucket: | 8.76ft in |
| Clearance at Max Lift and Dump: | 8.21ft in |
| Reach at Max Lift and Dump: | 20.3in |
Case SR200 Engine
| Engine Make: | 2239 |
| Engine Model: | 432T/M3 |
| Gross Power: | 74hp |
| Displacement: | 195cu in |
| Net Power: | 70hp |
Case SR200 Operational
| Fuel Capacity: | 20gal |
| Hydraulic System Fluid Capacity: | 5.3gal |
| Max Speed: | 11.9mph |
| Chain Box Fluid Capacity Each Side: | 1.8gal |
| Operating Speed: | 7.2mph |
| Tire Size: | 10 x 12.5 |
Case SR200 Loader
| Bucket Width: | 66in |
| Operating Load Rating: | 2000lb |
| Tipping Angle: | 4000degrees |
Case SR200 Hydraulic
| Pump Flow Capacity: | 8.2gal/min |
| Relief Valve Pressure: | 3000psi |
