Case SR150 Skid Steer Loader
Skid Steer Loader // Case
Case SR150 Specifications
Case SR150 Skid Steer Loader is equipped with ISM N844T/M3 52hp (gross power) engine. Combine value of all its cylinders is 122cu in (displacement).
Case SR150's fuel capacity is 16gal. It comes with 4gal hydraulic system fluid capacity respectively.
Case SR150 loader has 3030degrees tipping angle.
Its length with bucket is 9.95ft in and length without bucket is 8.01ft in. Case SR150's height to top of cab is 6.3ft in. And its wheelbase is 3.09ft in.
Case SR150 Dimentions
| Length With Bucket: | 9.95ft in |
| Width Over Tires: | 4.99ft in |
| Ground Clearance: | 7in |
| Height to Top of Cab: | 6.3ft in |
| Wheelbase: | 3.09ft in |
| Length W/O Bucket: | 8.01ft in |
| Clearance at Max Lift and Dump: | 7.39ft in |
| Reach at Max Lift and Dump: | 18.5in |
Case SR150 Engine
| Engine Model: | ISM N844T/M3 |
| Gross Power: | 52hp |
| Displacement: | 122cu in |
| Net Power: | 49hp |
Case SR150 Operational
| Fuel Capacity: | 16gal |
| Hydraulic System Fluid Capacity: | 4gal |
| Chain Box Fluid Capacity Each Side: | 1.7gal |
| Operating Speed: | 6.7mph |
| Tire Size: | 10 x 16.5 |
Case SR150 Loader
| Bucket Width: | 60in |
| Operating Load Rating: | 1500lb |
| Tipping Angle: | 3030degrees |
Case SR150 Hydraulic
| Pump Flow Capacity: | 15.6gal/min |
| Relief Valve Pressure: | 3000psi |
