Case 450 Skid Steer Loader
Skid Steer Loader // Case
Case 450 Specifications
Case 450 Skid Steer Loader is equipped with Family III 445T/M2, Tier II certified 88hp (gross power) engine. Combine value of all its cylinders is 274cu in (displacement).
Case 450's fuel capacity is 20.7gal. It comes with 4.5gal and 17gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 450 loader has 6200lb breakout force and 4900degrees tipping angle.
Its length with bucket is 11.74ft in and length without bucket is 9.06ft in. Case 450's height to top of cab is 6.67ft in. And its wheelbase is 3.83ft in.
Case 450 Dimentions
| Length With Bucket: | 11.74ft in |
| Width Over Tires: | 5.38ft in |
| Ground Clearance: | 9.1in |
| Height to Top of Cab: | 6.67ft in |
| Wheelbase: | 3.83ft in |
| Length W/O Bucket: | 9.06ft in |
| Clearance at Max Lift and Dump: | 7.88ft in |
| Reach at Max Lift and Dump: | 26.7in |
Case 450 Engine
| Engine Make: | 2239 |
| Engine Model: | Family III 445T/M2, Tier II certified |
| Gross Power: | 88hp |
| Displacement: | 274cu in |
| Net Power: | 82hp |
Case 450 Operational
| Fuel Capacity: | 20.7gal |
| Cooling System Fluid Capacity: | 4.5gal |
| Hydraulic System Fluid Capacity: | 17gal |
| Max Speed: | 12.3mph |
| Chain Box Fluid Capacity Each Side: | 2gal |
| Tire Size: | 12.00 x 16.5 |
Case 450 Loader
| Breakout Force: | 6200lb |
| Operating Load Rating: | 2450lb |
| Tipping Angle: | 4900degrees |
Case 450 Hydraulic
| Pump Flow Capacity: | 22.1gal/min |
| Relief Valve Pressure: | 3000psi |
