Case 445 Skid Steer Loader
Skid Steer Loader // Case
Case 445 Specifications
Case 445 Skid Steer Loader is equipped with Family III 445/M2, Tier II certified 80.5hp (gross power) engine. Combine value of all its cylinders is 274cu in (displacement).
Case 445's fuel capacity is 17.3gal. It comes with 4.5gal and 11gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 445 loader has 5000degrees tipping angle.
Its length with bucket is 11.29ft in and length without bucket is 8.58ft in. Case 445's height to top of cab is 6.67ft in. And its wheelbase is 3.75ft in.
Case 445 Dimentions
| Length With Bucket: | 11.29ft in |
| Width Over Tires: | 5ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.67ft in |
| Wheelbase: | 3.75ft in |
| Length W/O Bucket: | 8.58ft in |
| Clearance at Max Lift and Dump: | 7.69ft in |
| Reach at Max Lift and Dump: | 31.89in |
Case 445 Engine
| Engine Make: | 2239 |
| Engine Model: | Family III 445/M2, Tier II certified |
| Gross Power: | 80.5hp |
| Displacement: | 274cu in |
| Net Power: | 74hp |
Case 445 Operational
| Fuel Capacity: | 17.3gal |
| Cooling System Fluid Capacity: | 4.5gal |
| Hydraulic System Fluid Capacity: | 11gal |
| Max Speed: | 11.7mph |
| Chain Box Fluid Capacity Each Side: | 2gal |
| Tire Size: | 12.00 x 16.5 |
Case 445 Loader
| Operating Load Rating: | 2500lb |
| Tipping Angle: | 5000degrees |
Case 445 Hydraulic
| Pump Flow Capacity: | 21gal/min |
| Relief Valve Pressure: | 3050psi |
