Case 440 Skid Steer Loader
Skid Steer Loader // Case
Case 440 Specifications
Case 440 Skid Steer Loader is equipped with Family III 445T/M2, Tier II certified 89hp (gross power) engine. Combine value of all its cylinders is 274cu in (displacement).
Case 440's fuel capacity is 22gal. It comes with 4.5gal and 12.3gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 440 loader has 4400degrees tipping angle.
Its length with bucket is 10.58ft in and length without bucket is 8.67ft in. Case 440's height to top of cab is 6.39ft in. And its wheelbase is 3.58ft in.
Case 440 Dimentions
| Length With Bucket: | 10.58ft in |
| Width Over Tires: | 4.38ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.39ft in |
| Wheelbase: | 3.58ft in |
| Length W/O Bucket: | 8.67ft in |
| Clearance at Max Lift and Dump: | 8.06ft in |
| Reach at Max Lift and Dump: | 21.3in |
Case 440 Engine
| Engine Make: | 2239 |
| Engine Model: | Family III 445T/M2, Tier II certified |
| Gross Power: | 89hp |
| Displacement: | 274cu in |
| Net Power: | 82hp |
Case 440 Operational
| Fuel Capacity: | 22gal |
| Cooling System Fluid Capacity: | 4.5gal |
| Hydraulic System Fluid Capacity: | 12.3gal |
| Max Speed: | 11.9mph |
| Chain Box Fluid Capacity Each Side: | 1.5gal |
| Tire Size: | 12.00 x 16.5 |
Case 440 Loader
| Operating Load Rating: | 2200lb |
| Tipping Angle: | 4400degrees |
Case 440 Hydraulic
| Pump Flow Capacity: | 21gal/min |
| Relief Valve Pressure: | 3000psi |
