Case 440 SERIES III Skid Steer Loader
Skid Steer Loader // Case
Case 440 SERIES III Specifications
Case 440 SERIES III Skid Steer Loader is equipped with 445T/M3 diesel Tier III certified 89.9hp (gross power) engine. Combine value of all its cylinders is 274.7cu in (displacement).
Case 440 SERIES III's fuel capacity is 22.1gal. It comes with 3.1gal and 13.3gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 440 SERIES III loader has 4576lb breakout force and 4400.5degrees tipping angle.
Its length with bucket is 10.6ft in and length without bucket is 8.67ft in. Case 440 SERIES III's height to top of cab is 6.67ft in. And its wheelbase is 3.61ft in.
Case 440 SERIES III Dimentions
| Length With Bucket: | 10.6ft in |
| Width Over Tires: | 5.35ft in |
| Ground Clearance: | 9.02in |
| Height to Top of Cab: | 6.67ft in |
| Wheelbase: | 3.61ft in |
| Length W/O Bucket: | 8.67ft in |
| Clearance at Max Lift and Dump: | 8.04ft in |
| Reach at Max Lift and Dump: | 21.26in |
Case 440 SERIES III Engine
| Engine Make: | 2239 |
| Engine Model: | 445T/M3 diesel Tier III certified |
| Gross Power: | 89.9hp |
| Displacement: | 274.7cu in |
| Net Power: | 84.5hp |
Case 440 SERIES III Operational
| Fuel Capacity: | 22.1gal |
| Cooling System Fluid Capacity: | 3.1gal |
| Hydraulic System Fluid Capacity: | 13.3gal |
| Max Speed: | 7mph |
| Chain Box Fluid Capacity Each Side: | 2.1gal |
| Operating Speed: | 7mph |
| Tire Size: | 12.00 x 16.5 10 ply |
Case 440 SERIES III Loader
| Breakout Force: | 4576lb |
| Operating Load Rating: | 2200.3lb |
| Tipping Angle: | 4400.5degrees |
Case 440 SERIES III Hydraulic
| Pump Flow Capacity: | 22gal/min |
| Relief Valve Pressure: | 3050psi |
