Case 435 Skid Steer Loader
Skid Steer Loader // Case
Case 435 Specifications
Case 435 Skid Steer Loader is equipped with Family III 334T/M2, Tier II certified 78hp (gross power) engine. Combine value of all its cylinders is 205cu in (displacement).
Case 435's fuel capacity is 17.5gal. It comes with 4.5gal and 5.9gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 435 loader has 4600degrees tipping angle.
Its length with bucket is 11.29ft in and length without bucket is 8.6ft in. Case 435's height to top of cab is 6.67ft in. And its wheelbase is 3.75ft in.
Case 435 Dimentions
| Length With Bucket: | 11.29ft in |
| Width Over Tires: | 5.09ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.67ft in |
| Wheelbase: | 3.75ft in |
| Length W/O Bucket: | 8.6ft in |
| Clearance at Max Lift and Dump: | 7.55ft in |
| Reach at Max Lift and Dump: | 29.9in |
Case 435 Engine
| Engine Make: | 2239 |
| Engine Model: | Family III 334T/M2, Tier II certified |
| Gross Power: | 78hp |
| Displacement: | 205cu in |
| Net Power: | 72hp |
Case 435 Operational
| Fuel Capacity: | 17.5gal |
| Cooling System Fluid Capacity: | 4.5gal |
| Hydraulic System Fluid Capacity: | 5.9gal |
| Max Speed: | 11.7mph |
| Chain Box Fluid Capacity Each Side: | 2gal |
| Tire Size: | 12.00 x 16.5 |
Case 435 Loader
| Operating Load Rating: | 2300lb |
| Tipping Angle: | 4600degrees |
Case 435 Hydraulic
| Pump Flow Capacity: | 21gal/min |
| Relief Valve Pressure: | 3050psi |
