Case 435 SERIES III Skid Steer Loader
Skid Steer Loader // Case
Case 435 SERIES III Specifications
Case 435 SERIES III Skid Steer Loader is equipped with 432T/M3 diesel Tier III certified 81.9hp (gross power) engine. Combine value of all its cylinders is 195.3cu in (displacement).
Case 435 SERIES III's fuel capacity is 17.4gal. It comes with 3.1gal and 11gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 435 SERIES III loader has 4400lb breakout force and 4398.3degrees tipping angle.
Its length with bucket is 10.96ft in and length without bucket is 8.7ft in. Case 435 SERIES III's height to top of cab is 6.93ft in. And its wheelbase is 3.75ft in.
Case 435 SERIES III Dimentions
| Length With Bucket: | 10.96ft in |
| Width Over Tires: | 6.01ft in |
| Ground Clearance: | 9.3in |
| Height to Top of Cab: | 6.93ft in |
| Wheelbase: | 3.75ft in |
| Length W/O Bucket: | 8.7ft in |
| Clearance at Max Lift and Dump: | 7.65ft in |
| Reach at Max Lift and Dump: | 27.56in |
Case 435 SERIES III Engine
| Engine Make: | 2239 |
| Engine Model: | 432T/M3 diesel Tier III certified |
| Gross Power: | 81.9hp |
| Displacement: | 195.3cu in |
| Net Power: | 76.5hp |
Case 435 SERIES III Operational
| Fuel Capacity: | 17.4gal |
| Cooling System Fluid Capacity: | 3.1gal |
| Hydraulic System Fluid Capacity: | 11gal |
| Max Speed: | 7mph |
| Chain Box Fluid Capacity Each Side: | 2.1gal |
| Operating Speed: | 7mph |
| Tire Size: | 12.00 x 16.5 10 ply |
Case 435 SERIES III Loader
| Breakout Force: | 4400lb |
| Operating Load Rating: | 2200.3lb |
| Tipping Angle: | 4398.3degrees |
Case 435 SERIES III Hydraulic
| Pump Flow Capacity: | 23.8gal/min |
| Relief Valve Pressure: | 3050psi |
