Case 430 Skid Steer Loader
Skid Steer Loader // Case
Case 430 Specifications
Case 430 Skid Steer Loader is equipped with Family III 445/M2, Tier II certified 80hp (gross power) engine. Combine value of all its cylinders is 274cu in (displacement).
Case 430's fuel capacity is 22gal. It comes with 4.5gal and 13.3gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 430 loader has 4000degrees tipping angle.
Its length with bucket is 10.6ft in and length without bucket is 8.67ft in. Case 430's height to top of cab is 6.4ft in. And its wheelbase is 3.61ft in.
Case 430 Dimentions
| Length With Bucket: | 10.6ft in |
| Width Over Tires: | 4.4ft in |
| Ground Clearance: | 9in |
| Height to Top of Cab: | 6.4ft in |
| Wheelbase: | 3.61ft in |
| Length W/O Bucket: | 8.67ft in |
| Clearance at Max Lift and Dump: | 8.04ft in |
| Reach at Max Lift and Dump: | 21.3in |
Case 430 Engine
| Engine Make: | 2239 |
| Engine Model: | Family III 445/M2, Tier II certified |
| Gross Power: | 80hp |
| Displacement: | 274cu in |
| Net Power: | 74hp |
Case 430 Operational
| Fuel Capacity: | 22gal |
| Cooling System Fluid Capacity: | 4.5gal |
| Hydraulic System Fluid Capacity: | 13.3gal |
| Max Speed: | 11.9mph |
| Chain Box Fluid Capacity Each Side: | 1.5gal |
| Tire Size: | 12.00 x 16.5 |
Case 430 Loader
| Operating Load Rating: | 2000lb |
| Tipping Angle: | 4000degrees |
Case 430 Hydraulic
| Pump Flow Capacity: | 21gal/min |
| Relief Valve Pressure: | 3000psi |
