Case 430 SERIES III Skid Steer Loader
Skid Steer Loader // Case
Case 430 SERIES III Specifications
Case 430 SERIES III Skid Steer Loader is equipped with 432T/M3 diesel Tier III certified 81.9hp (gross power) engine. Combine value of all its cylinders is 195.3cu in (displacement).
Case 430 SERIES III's fuel capacity is 22.1gal. It comes with 3.1gal and 13.3gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 430 SERIES III loader has 4304lb breakout force and 3999.2degrees tipping angle.
Its length with bucket is 10.8ft in and length without bucket is 8.54ft in. Case 430 SERIES III's height to top of cab is 6.67ft in. And its wheelbase is 3.52ft in.
Case 430 SERIES III Dimentions
| Length With Bucket: | 10.8ft in |
| Width Over Tires: | 4.93ft in |
| Ground Clearance: | 9.02in |
| Height to Top of Cab: | 6.67ft in |
| Wheelbase: | 3.52ft in |
| Length W/O Bucket: | 8.54ft in |
| Clearance at Max Lift and Dump: | 8.01ft in |
| Reach at Max Lift and Dump: | 22.84in |
Case 430 SERIES III Engine
| Engine Make: | 2239 |
| Engine Model: | 432T/M3 diesel Tier III certified |
| Gross Power: | 81.9hp |
| Displacement: | 195.3cu in |
| Net Power: | 76.5hp |
Case 430 SERIES III Operational
| Fuel Capacity: | 22.1gal |
| Cooling System Fluid Capacity: | 3.1gal |
| Hydraulic System Fluid Capacity: | 13.3gal |
| Max Speed: | 7mph |
| Chain Box Fluid Capacity Each Side: | 2.1gal |
| Operating Speed: | 7mph |
| Tire Size: | 10.00 x 16.5 8 ply |
Case 430 SERIES III Loader
| Breakout Force: | 4304lb |
| Operating Load Rating: | 1999.6lb |
| Tipping Angle: | 3999.2degrees |
Case 430 SERIES III Hydraulic
| Pump Flow Capacity: | 23.8gal/min |
| Relief Valve Pressure: | 3050psi |
