Case 420 Skid Steer Loader
Skid Steer Loader // Case
Case 420 Specifications
Case 420 Skid Steer Loader is equipped with 422T/M2, Tier II certified 59hp (gross power) engine. Combine value of all its cylinders is 134cu in (displacement).
Case 420's fuel capacity is 22gal. It comes with 4.5gal and 13.2gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 420 loader has 3500degrees tipping angle.
Its length with bucket is 10.27ft in and length without bucket is 8.34ft in. Case 420's height to top of cab is 6.3ft in. And its wheelbase is 3.45ft in.
Case 420 Dimentions
| Length With Bucket: | 10.27ft in |
| Width Over Tires: | 4.11ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.3ft in |
| Wheelbase: | 3.45ft in |
| Length W/O Bucket: | 8.34ft in |
| Clearance at Max Lift and Dump: | 7.45ft in |
| Reach at Max Lift and Dump: | 23.6in |
Case 420 Engine
| Engine Make: | 2239 |
| Engine Model: | 422T/M2, Tier II certified |
| Gross Power: | 59hp |
| Displacement: | 134cu in |
| Net Power: | 56hp |
Case 420 Operational
| Fuel Capacity: | 22gal |
| Cooling System Fluid Capacity: | 4.5gal |
| Hydraulic System Fluid Capacity: | 13.2gal |
| Max Speed: | 6.5mph |
| Chain Box Fluid Capacity Each Side: | 2gal |
| Operating Speed: | 6.9mph |
| Tire Size: | 10.00 x 16.5 |
Case 420 Loader
| Operating Load Rating: | 1750lb |
| Tipping Angle: | 3500degrees |
Case 420 Hydraulic
| Pump Flow Capacity: | 19.5gal/min |
| Relief Valve Pressure: | 3050psi |
