Case 410 Skid Steer Loader
Skid Steer Loader // Case
Case 410 Specifications
Case 410 Skid Steer Loader is equipped with 422/M2, Tier II certified 51hp (gross power) engine. Combine value of all its cylinders is 134cu in (displacement).
Case 410's fuel capacity is 22gal. It comes with 4.5gal and 13.3gal cooling system fluid capacity and hydraulic system fluid capacity respectively.
Case 410 loader has 4129lb breakout force and 3000degrees tipping angle.
Its length with bucket is 10.26ft in and length without bucket is 8.33ft in. Case 410's height to top of cab is 6.28ft in. And its wheelbase is 3.43ft in.
Case 410 Dimentions
| Length With Bucket: | 10.26ft in |
| Width Over Tires: | 4.08ft in |
| Ground Clearance: | 8in |
| Height to Top of Cab: | 6.28ft in |
| Wheelbase: | 3.43ft in |
| Length W/O Bucket: | 8.33ft in |
| Clearance at Max Lift and Dump: | 7.48ft in |
| Reach at Max Lift and Dump: | 23.6in |
Case 410 Engine
| Engine Make: | 2239 |
| Engine Model: | 422/M2, Tier II certified |
| Gross Power: | 51hp |
| Displacement: | 134cu in |
| Net Power: | 49hp |
Case 410 Operational
| Fuel Capacity: | 22gal |
| Cooling System Fluid Capacity: | 4.5gal |
| Hydraulic System Fluid Capacity: | 13.3gal |
| Max Speed: | 6.8mph |
| Chain Box Fluid Capacity Each Side: | 1.5gal |
| Operating Speed: | 6.9mph |
| Tire Size: | 10.00 x 16.5 |
Case 410 Loader
| Breakout Force: | 4129lb |
| Operating Load Rating: | 1500lb |
| Tipping Angle: | 3000degrees |
Case 410 Hydraulic
| Pump Flow Capacity: | 18gal/min |
| Relief Valve Pressure: | 3000psi |
