Caterpillar 299D XHP (2012) Compact Track Loader
Compact Track Loader // Caterpillar
Caterpillar 299D XHP (2012) Dimensions
| Bucket Pin Height - Carry Position: | 7.7 in (20 cm) |
| Bucket Pin Height - Maximum Lift: | 10.6 ft (3 m) |
| Clearance at Maximum Lift and Dump: | 95.2 in (242 cm) |
| Departure Angle: | 39 ° |
| Ground Clearance: | 0.8 ft in (2 cm) |
| Height - Top of Cab: | 7 ft (2 m) |
| Length - Track on Ground: | 69.6 in (177 cm) |
| Length - With Bucket on Ground: | 151.6 in (385 cm) |
| Maximum Dump Angle: | 52 ° |
| Maximum Overall Height: | 159.4 in (405 cm) |
| Maximum Reach - With Arms Parallel: | 50.7 in (129 cm) |
| Overall Length - Track: | 89.4 in (227 cm) |
| Rack Back Angle - Maximum Height: | 83 ° |
| Reach at Maximum Lift/Dump: | 31 in (79 cm) |
| Turn Radius from Center - Bucket: | 92.4 in (235 cm) |
| Turn Radius from Center - Coupler: | 60.4 in (153 cm) |
| Turn Radius from Center - Rear: | 72.8 in (185 cm) |
| Vehicle Width: | 76 in (193 cm) |
Caterpillar 299D XHP (2012) Engine
| Bore: | 3.9 in (10 cm) |
| Displacement: | 232 cu in (0 m) |
| Engine Model: | Cat C3.8 (turbocharged) |
| Gross Power: | 110 hp (82 kw) |
| Gross Power - SAE J1995: | 110 hp (82 kw) |
| Net Power: | 106 hp (79 kw) |
| Net Power - SAE 1349: | 106 hp (79 kw) |
| Stroke: | 4.7 in (12 cm) |
Caterpillar 299D XHP (2012) Hydraulic System
| Hydraulic Power: | 44 hp (33 kw) |
| Loader Hydraulic Flow: | 23 gal/min (87 l/min) |
| Loader Hydraulic Pressure: | 3335 psi |
Caterpillar 299D XHP (2012) Loader
Caterpillar 299D XHP (2012) Operating Specification
| Breakout Force - Tilt Cylinder: | 7381 lbs (3,348 kg) |
| Ground Contact Area: | 2184 cu in (0 m) |
| Ground Pressure: | 5.3 psi |
| Rated Operating Capacities - 35% Tipping Load: | 3185 lbs (1,445 kg) |
| Rated Operating Capacities - 50% Tipping Load: | 4550 lbs (2,064 kg) |
| Tipping Load: | 9100 lbs (4,128 kg) |
Caterpillar 299D XHP (2012) PowerTrain
| Travel Speed Forward: | 5 mph (8 kph) |
| Travel Speed Reverse: | 5 mph (8 kph) |
Caterpillar 299D XHP (2012) Service Refill Capacities
| Cooling System: | 3.7 gal (14 l) |
| Engine Crankcase: | 2.6 gal (10 l) |
| Fuel Tank: | 30.8 gal (117 l) |
| Hydraulic System: | 16 gal (61 l) |
| Hydraulic Tank: | 10.3 gal (39 l) |
Caterpillar 299D XHP (2012) Cab
| FOPS: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II: | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 299D XHP (2012) Undercarriage
| Ground Contact Area: | 2184 cu in (0 m) |
| Ground Pressure: | 5.3 psi |
