Caterpillar 277C Compact Track Loader
Compact Track Loader // Caterpillar
Caterpillar 277C Dimensions
| Bucket Pin Height - Carry Position: | 7.9 in (20 cm) |
| Bucket Pin Height - Maximum Lift: | 10.3 ft (3 m) |
| Clearance at Max Lift and Dump: | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump: | 95.5 in (243 cm) |
| Departure Angle: | 42 ° |
| Ground Clearance: | 8.8 in (22 cm) |
| Height - Top of Cab: | 7 ft (2 m) |
| Length - Track on Ground: | 71.2 in (181 cm) |
| Length - with Bucket: | 12.2 ft (4 m) |
| Length - With Bucket on Ground: | 145.4 in (369 cm) |
| Length - without Bucket: | 9.8 ft (3 m) |
| Maximum Dump Angle: | 40 ° |
| Maximum Overall Height: | 157.4 in (400 cm) |
| Maximum Reach - With Arms Parallel: | 55.4 in (141 cm) |
| Overall Length - Track: | 90 in (229 cm) |
| Rack Back Angle - Maximum Height: | 85 ° |
| Reach at Max Lift and Dump: | 2.1 ft (1 m) |
| Reach at Maximum Lift/Dump: | 24.3 in (62 cm) |
| Turn Radius from Center - Bucket: | 91.7 in (233 cm) |
| Turn Radius from Center - Coupler: | 58.5 in (149 cm) |
| Turn Radius from Center - Rear: | 64 in (163 cm) |
| Turning Radius from Center - inc bucket: | 91.8 in (233 cm) |
| Turning Radius from Center - machine rear: | 64.1 in (163 cm) |
| Vehicle Width: | 78 in (198 cm) |
| Width Over Tracks: | 6.5 ft (2 m) |
Caterpillar 277C Engine
| Bore: | 3.7 in (9 cm) |
| Displacement: | 201 cu in (0 m) |
| Engine Model: | Cat C3.4 DIT |
| Gross Power: | 84 hp (63 kw) |
| Gross Power - SAE J1995: | 84 hp (63 kw) |
| Number of Cylinders: | 4.0 |
| Net Power: | 82 hp (61 kw) |
| Net Power - SAE 1349: | 82 hp (61 kw) |
| Stroke: | 4.7 in (12 cm) |
| Power Measured @: | 2500 rpm |
Caterpillar 277C Hydraulic System
| Hydraulic Power: | 42.8 hp (32 kw) |
| Loader Hydraulic Flow: | 22 gal/min (83 l/min) |
| Loader Hydraulic Pressure: | 3335 psi |
| Pump Flow: | 22.2 gal/min (84 l/min) |
| Relief Valve Pressure: | 3335.9 psi |
Caterpillar 277C Loader
| Breakout Force: | 7308 lbs (3,315 kg) |
| Operating Load: | 7054.8 lbs (3,200 kg) |
| Tipping Angle: | 14715.9 ° |
Caterpillar 277C Operating Specification
| Alternator Supplied Amperage: | 90 A |
| Breakout Force - Tilt Cylinder: | 7308 lbs (3,315 kg) |
| Cooling System Fluid Capacity: | 3.7 gal (14 l) |
| Engine Oil Capacity: | 2.7 gal (10 l) |
| Fuel Capacity: | 25.9 gal (98 l) |
| Ground Contact Area: | 2542 cu in (0 m) |
| Ground Pressure: | 3.7 psi |
| Hydraulic System Fluid Capacity: | 15.1 gal (57 l) |
| Max Speed - high range: | 9.3 mph (15 kph) |
| Max Speed - low range: | 5.6 mph (9 kph) |
| Operating Voltage: | 12 V V |
| Operating Weight: | 9495 lbs (4,307 kg) |
| Rated Operating Capacities - 35% Tipping Load: | 2337 lbs (1,060 kg) |
| Rated Operating Capacities - 50% Tipping Load: | 3200 lbs (1,452 kg) |
| Tipping Load: | 6675 lbs (3,028 kg) |
Caterpillar 277C PowerTrain
| Travel Speed Forward: | 5.6 mph (9 kph) |
| Travel Speed Reverse: | 5.6 mph (9 kph) |
Caterpillar 277C Service Refill Capacities
| Cooling System: | 3.7 gal (14 l) |
| Engine Crankcase: | 2.6 gal (10 l) |
| Fuel Tank: | 26 gal (98 l) |
| Hydraulic System: | 15 gal (57 l) |
| Hydraulic Tank: | 11 gal (42 l) |
Caterpillar 277C Cab
| FOPS: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II: | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 277C Undercarriage
| Ground Contact Area: | 2542 cu in (0 m) |
| Ground Pressure: | 3.7 psi |
| Length of Track on Ground: | 6 ft (2 m) |
