Caterpillar 247B2 Compact Track Loader
Compact Track Loader // Caterpillar
Caterpillar 247B2 Dimensions
| Bucket Pin Height - Carry Position: | 9.3 in (24 cm) |
| Bucket Pin Height - Maximum Lift: | 9.4 ft (3 m) |
| Clearance at Max Lift and Dump: | 7.1 ft (2 m) |
| Clearance at Maximum Lift and Dump: | 84 in (213 cm) |
| Departure Angle: | 41 ° |
| Ground Clearance: | 0.9 ft in (2 cm) |
| Height - Top of Cab: | 6.5 ft (2 m) |
| Length - Track on Ground: | 59 in (150 cm) |
| Length - with Bucket: | 10.8 ft (3 m) |
| Length - With Bucket on Ground: | 129 in (328 cm) |
| Length - without Bucket: | 8.3 ft (3 m) |
| Maximum Dump Angle: | 40 ° |
| Maximum Overall Height: | 150 in (381 cm) |
| Maximum Reach - With Arms Parallel: | 54.9 in (139 cm) |
| Overall Length - Track: | 75 in (191 cm) |
| Rack Back Angle - Maximum Height: | 96.7 ° |
| Reach at Max Lift and Dump: | 2.1 ft (1 m) |
| Reach at Maximum Lift/Dump: | 25 in (64 cm) |
| Turn Radius from Center - Bucket: | 84.9 in (216 cm) |
| Turn Radius from Center - Coupler: | 51.9 in (132 cm) |
| Turn Radius from Center - Rear: | 53.4 in (136 cm) |
| Turning Radius from Center - inc bucket: | 85 in (216 cm) |
| Turning Radius from Center - machine rear: | 53.4 in (136 cm) |
| Vehicle Width: | 66 in (168 cm) |
| Width Over Tracks: | 5.5 ft (2 m) |
Caterpillar 247B2 Engine
| Bore: | 3.3 in (8 cm) |
| Displacement: | 134 cu in (0 m) |
| Engine Model: | C2.2T |
| Gross Power: | 61 hp (45 kw) |
| Gross Power - SAE J1995: | 61 hp (45 kw) |
| Net Power: | 56 hp (42 kw) |
| Net Power - SAE 1349: | 56 hp (42 kw) |
| Stroke: | 3.9 in (10 cm) |
Caterpillar 247B2 Hydraulic System
| Hydraulic Flow: | Standard |
| Hydraulic Power: | 30.4 hp (23 kw) |
| Loader Hydraulic Flow: | 15.6 gal/min (59 l/min) |
| Loader Hydraulic Pressure: | 3335 psi |
| Pump Flow: | 15.9 gal/min (60 l/min) |
| Relief Valve Pressure: | 3335 psi |
Caterpillar 247B2 Loader
| Breakout Force: | 4060 lbs (1,842 kg) |
| Operating Load: | 2050 lbs (930 kg) |
| Tipping Angle: | 4100 ° |
Caterpillar 247B2 Operating Specification
| Alternator Supplied Amperage: | 85 A |
| Breakout Force - Tilt Cylinder: | 4060 lbs (1,842 kg) |
| Cooling System Fluid Capacity: | 2.7 gal (10 l) |
| Engine Oil Capacity: | 2.7 gal (10 l) |
| Fuel Capacity: | 17.2 gal (65 l) |
| Ground Contact Area: | 1770 cu in (0 m) |
| Ground Pressure: | 4 psi |
| Hydraulic System Fluid Capacity: | 14.6 gal (55 l) |
| Max Speed - high range: | 7.6 mph (12 kph) |
| Max Speed - low range: | 7.6 mph (12 kph) |
| Operating Voltage: | 12 V V |
| Operating Weight: | 6997 lbs (3,174 kg) |
| Rated Operating Capacities - 35% Tipping Load: | 1435 lbs (651 kg) |
| Rated Operating Capacities - 50% Tipping Load: | 2050 lbs (930 kg) |
| Tipping Load: | 4100 lbs (1,860 kg) |
Caterpillar 247B2 PowerTrain
| Travel Speed Forward: | 7.6 mph (12 kph) |
| Travel Speed Reverse: | 7.6 mph (12 kph) |
Caterpillar 247B2 Service Refill Capacities
| Cooling System: | 2.6 gal (10 l) |
| Engine Crankcase: | 2.6 gal (10 l) |
| Fuel Tank: | 17 gal (64 l) |
| Hydraulic System: | 14.5 gal (55 l) |
| Hydraulic Tank: | 9.2 gal (35 l) |
Caterpillar 247B2 Cab
| FOPS: | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II: | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS: | SAE J1040 MAY94, ISO 3471:1994 |
Caterpillar 247B2 Undercarriage
| Ground Contact Area: | 1770 cu in (0 m) |
| Ground Pressure: | 4 psi |
| Length of Track on Ground: | 5 ft (2 m) |
